Move lim turbo Punto 1.3 mjet 70 HP more than 1.5 bar

[SandroMarciano]

what you have written on the helios, etc, etc ? correct, but ? exceeded, in the sense that the voices say that ? have exported a file from helios .ols do a search on ******I don't know... however it could be full...

for the speech of the injectors, and set the screen duration by ori of the 70cv and 95, you say? what are the best 1480bar max. also when you change injectors you also need to complete the map of the duration with those of the machine from which you take the injectors, otherwise sballerai consumption, rpm, etc etc

[Xtreme0303]

unfortunately, every time the ecu marelli applies omert? about the changes...

[Fede78]

what you have written on the helios, etc, etc ? correct, but ? exceeded, in the sense that the voices say that ? have exported a file from helios .ols do a search on ******I don't know... however it could be full...

for the speech of the injectors, and set the screen duration by ori of the 70cv and 95, you say? what are the best 1480bar max. also when you change injectors you also need to complete the map of the duration with those of the machine from which you take the injectors, otherwise sballerai consumption, rpm, etc etc

Good to know I'm a file ols..
For the injectors I left them about a month and then I put those golds because? in the complex seemed to be going better.
If all goes well, in a week I should mount the variable turbine geometry of the 90hp geometry and managed by wg...

After I get the screen 70 and 95 hp,...
For the fact that it does not exceed 1480 bar pu? be a loss for the injectors that are made to go at 1600? Or doesn't matter?
The other thing, the fact that the mechanic does not have them encoded or how you call the procedure where you have to enter the code of the injectors pu? affect this performance?

Thanks.

[Xtreme0303]

to encode you can use a simple diagnosis... I don't see why? he has not done

[tezzero]

To trick the ecu through the map...without diventari crazy with the resistors, is there a module already? ready with a trimmer to adjust the voltage..I use it for years

[Xtreme0303]

bought where?

[Fede78]

To trick the ecu through the map...without diventari crazy with the resistors, is there a module already? ready with a trimmer to adjust the voltage..I use it for years

Also interested I...

[Giacomo]

Guys... but have you tried putting a sensor that works up to 3Bar? please try for a moment on the 70cv the problem goes away the same thing goes for injection fiat edc15 Euro 2 type bravo, first series 156 of the first series and so on.
I'm attaching a nice document with all the info you need.

[mariodarkblue]

Hello james...you want to put the sensor 3 bar on edc15...if you are not adapting to the map, the only sensor ? useless

[SandroMarciano]

Hello james...you want to put the sensor 3 bar on edc15...if you are not adapting to the map, the only sensor ? useless

I love, not give? recovery, but it will be? the same thing to put a resistor "very hardy"!