Problem map new beetle 1.9 tdi 90cv edc15v

[marcusmagic]

perfect!! I'm glad that you fixed it with my file could you tell me at what speed do you get?? and if there are limits?? thanks...

[frantik3]

if I remember correctly over the 4volt from the problem

[dvdtuning]

No, because he was an engine very exploited and noisy I thought of it to stretch from the master, I have tried only the first three gears, and everything was ok...he called me after I made other tests and everything worked, thanks marcus I owe you a favor!

[marcusmagic]

No, because he was an engine very exploited and noisy I thought of it to stretch from the master, I have tried only the first three gears, and everything was ok...he called me after I made other tests and everything worked, thanks marcus I owe you a favor!

I understand..quiet when you need are available the important thing is that you have solved ....

[dvdtuning]

So the customer nn nn' being his cousin, and then all of a shed...thanks again!

[munro]

if I remember correctly over the 4volt from the problem

if I'm not mistaken the limit not to be exceeded should be 4,50-a 4.65 volts....

[marcusmagic]

you can't exceed this threshold!! but I am generally in order to avoid problems, I'm usually more of 4.00 more I less I don't give.....

[dvdtuning]

How do you calculate the values in the map?

[SandroMarciano]

take advantage of the discussion to ask for an info, I should make a '99, always 90hp, to write it is necessary to disassemble the unit and change it to the tour, is it true?

[marcusmagic]

take advantage of the discussion to ask for an info, I should make a '99, always 90hp, to write it is necessary to disassemble the unit and change it to the tour, is it true?

first thing's first,that in the discussion and a 110cv 90 and different..you have to open the ecu and you will find two flash 256kb and I know I have to (aa) I hh ll..am28f020 remove read and modify