hi all, I have had a information on this car .... if you unplug the presette those near the egr valve but also the electrical connectors typically without disconnecting the battery jump of the components inside the ecu... do you think it is true ? and that happened to someone? which components they jump? of course the machine by a written engine failure on the dysplay and nin exceeds the 3000giri... thank you in advance
you disconnect the various connectors without that they go in a short while raise them, or make sparks the last I see that something from the ecu.
first of all, you need to make a diagnosis and see what it gives you.
Check the encoding of the injectors.
check the egr.
Check debimentro.
check the glow plugs .
Let us know/
not true,You should make a diagnosis to see what's the error that you find!!
You do not really understand something until you can explain it to your grandmother (Einstein)
make a diagnosis and see....
jump components no...
but something will be? success...
If he loses the encoding injectors pu? cause the message on the dyspay motor fault and the fact that it does not exceed 3000 rpm at idle and smoke bisncastro? Thank you in advance
but a diagnosis nothing
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
In diagnosis coding injectors leads to the 1 and 2 codes the injectors while the 3 and 4 dashes pu? this be the problem ?
the coding of the injectors, I would say that ? better to do that if you don't see,
however, I have a lot of trouble on those machines with the fap that hangs
? was defappata
I imagine that this problem came out after the luca stanca. ( the luca stanca ? executed in the correct manner)
Write permission
Quote