Of course, to write about with mpps clone
Of course, to write about with mpps clone
in the pm surely the most? someone helps you
Try to disable the time sensor decoding, and most of the times it works
hello.Originally Written by Backgroop
Try to disable the time sensor decoding, and most of the times it works
the time sense decoding the I found version 1.2
how do I proceed:
I open the original file that I found:
I select---
date--- Abarth, alfa, fiat, etc...
I select: DPF remove (to which there are several entries) Magneti marelli MDJ6 MDJ8
I click on the " Decode the file and save.
then for the EGR I open the created file,
I select: EGR block (to which there are several entries) the mangeti marelli MDJ6
Save the file, and the dpf ? off, and I'm going to write with mpps.
be perfect, remember that writing the file with the mpps have to cut to 1mb..
how do I cut the file to 1 mb
check that the file is 2mb, if you then have to cut.
if you use ecm.. open the file
go to utility - conversion - cut and paste - you open the affected file - then under selections defined by the user and write 0fffff save everything and controls the size of the saved file..
ok.
have you ever tried to disable the dpf? with time
you on a lot done without any problems..
Good morning to all.
I created the file with a time sensor...
I made the block of the egr MJD6 and I saved the file
after I reopened the file you created and I did:
the deactivation of the dpf by selecting MDJ6.
and I resaved the file...
I'll post the file, if someone can? kindly check to see if everything is ok.
thanks
Write permission
Quote