hello pablo,
I understand what you mean ;-) then you pretty much maybe one of the files ? entire flash and I see that there is information already? from the beginning, but this is the data the software and not the maps! and another file where c'? a horizontal line ? file with the only info of the maps (the initial 75%, in fact ? blank) that's why see two completely different things!
hello
any help guys? I mean the EGR...
Hi Guys,
Will update: I worked on further for the dpf and ? been done right the file, and today I removed the dpf filter(physically) and everything works! At the moment no lights etc
Now in a few days load ERG_off .
You do know.
hello
Update: after 3 weeks, I can confirm the correct exclusion of the dpf!
Everything is ok without lights and errors!
I ask you one thing: ? advisable to close the EGR seen that c'? pi? dpf?
Thanks
Say to youOriginally Written by panny200555
Unshared knowledge remains an end in itself.
in fact, it was exactly what I had done! but I ask you: what is pu? be the negative side in the close the EGR?
? can you smoke more??
No ? the exact opposite...smoke less. Disadvantages perhaps the engine goes up in temperature a bit more? slowly, but nothing extremely significant.
understood! but how do you know if the EGR ? the closed state is good or not? the cio? in theory, I'm sure ? closed but in practice I'm not sure... I have autocom..from the diagnosis you can? check?
if in the parameters c'? the entry position, EGR valve, you can see.
if ? closed properly it should be at 4% fixed
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
I don't think I've seen this parameter...but for safety control again..
Write permission
Quote
