I take it off the board and gratto slightly with a bit of abrasive paper, pitches on the other side of the card, then risaldo all for good.
It is a work-a little bit longer, but in doing so i shall never go back...
I take it off the board and gratto slightly with a bit of abrasive paper, pitches on the other side of the card, then risaldo all for good.
It is a work-a little bit longer, but in doing so i shall never go back...
I change the capacitors and the transistors and risaldo all....so far everything is ok...
dear tecnoracing, I registered to the website, but in spite of all I can't see your files Astra Isuzu.rar. Since I was on the street with my Astra 1.7 DTI because of the ecu, fuel pump I was interested to read your instructions.
Last edited by msport (exil77grande); 21-05-2013 at 16:11
very rarely,but to me ? sucesso a couple of cases that jumps to a final power in other cases, skip one pin of the capacitor is large(the one immersed in the silicone)cases are very rare,95% of the welds resolves
also the mosfet and the voltage regulator damage problems
hi, I can not download the file
in addition to the welds should also see the capacitors if they are swollen, functioning etc.