as l have found it ? it was hard, or flowed freely? oh, I forgot, you turn on the eoc when you restrict?
as l have found it ? it was hard, or flowed freely? oh, I forgot, you turn on the eoc when you restrict?
no, flowed freely! will not turn on no light when it's the default!
ok try to check the whole circuit of the low-pressure fuel including the decanter sometimes you find obstructions, then let me know
ok, you tell me where you got the cables for trucks for the autocom?
I'm sorry I bought them in china, I tried them work if the admin allows me I'll give you the link pin to make the diagnosis obd iveco 30
ok, thank you!
as I have recommended it to someone I can't remember who we also can provide the cables to the truck but do not go very well and I would therefore advise against the purchase.Originally Written by usardaun
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
mail the pin out.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
I don't know the iveco? once ? happened to me a vehicle that could not, in the pi? it also lit the lamp for the engine , from the diagnosis, I remember that was related to the turbo pressure,asked a friend who works at iveco, I did check the air supply of the vgt before and after the filter ,clean and lubricate the actuator above the turbine to control the movement of the lever of the variable geometry but everything was ok in the end it was a broken intercooler,try to make a control by putting it under pressure, hello. I forgot, I also did the test turbo with texa and gave me all ok
Hi ,happened to me and the same problem and it was the variable geometry crashed .IN the diagnosis came erore that spoke clear
Write permission
Quote