problem vw multivan t5

[rego88]

good morning guys.... I'm coming crazy with a vw t5 multivan edc17cp20..... alch? I decided to ask for help to you as I have no experience on edc17..... but I don't see much different from the edc16...
basically, doing the map on this van and any test I do... I always have a problem.... practically exceeded 3000 rpm, I start to have holes and lost power, kind of as if the egr valve is opened and richiudesse.... I tried to leave it open, to delete it, I thought it was the pressure of the rail, I've deleted, I lowered the map, I lowered the prex of the turbo.... I have done many tests.... but I can't seem to get to the ****.... I enclose, ori, and the 3-step that I did, always with the bad riusltato..... in the meantime, ringriazio who will? generous to help me solve the problem!!!

[rego88]

no one that can see me the file??? thanks a lot!!!

[jolidj]

meanwhile, the maps pedal are 8x 13 ( if no use winols 13x8 ) the high part return it ori , the torque is too high, try nn pass the value of the map 052534 . 067e7e let her ori. 0773fa idem.076aa2 lim torque,0712e6 ori.gesione egr ori.se scori l-the beginning of the file you have similar maps nn toccate. all those bits x the limiter rail nn serve, tap the maps rail and limiters after them.
from tap have. pedal, torque,timing,turbo,rail. enough.
please let us know.

[rego88]

meanwhile, the maps pedal are 8x 13 ( if no use winols 13x8 ) the high part return it ori , the torque is too high, try nn pass the value of the map 052534 . 067e7e let her ori. 0773fa idem.076aa2 lim torque,0712e6 ori.gesione egr ori.se scori l-the beginning of the file you have similar maps nn toccate. all those bits x the limiter rail nn serve, tap the maps rail and limiters after them.
from tap have. pedal, torque,timing,turbo,rail. enough.
please let us know.

thanks a lot of help... I've done 2 step... can you check please if that's okay?? thanks a lot...
p.s.:
0210AC should be pedal correct me if I'm wrong
0436F8 and the like arranged
0523FE lim torque is lowered below the value of 4000 ( but if I raise 052534 that happens??)

thanks a lot in advance!!

[jolidj]

I have only seen the mod3 . I think that I have problems done so. give it a try and let us know.

[jolidj]

as gone this machine??

[rego88]

sorry jolly..... I have not had the time to do tests on this car, but have you seen the mod 3 which one?? the last 2 are attached to step4 and step5, made on the basis of how you told me you, me to control them please???

[jolidj]

yes sorry , I meant l-last posted to try it out and let us know.

[tezzero]

good morning guys.... I'm coming crazy with a vw t5 multivan edc17cp20..... alch? I decided to ask for help to you as I have no experience on edc17..... but I don't see much different from the edc16...
basically, doing the map on this van and any test I do... I always have a problem.... practically exceeded 3000 rpm, I start to have holes and lost power, kind of as if the egr valve is opened and richiudesse.... I tried to leave it open, to delete it, I thought it was the pressure of the rail, I've deleted, I lowered the map, I lowered the prex of the turbo.... I have done many tests.... but I can't seem to get to the ****.... I enclose, ori, and the 3-step that I did, always with the bad riusltato..... in the meantime, ringriazio who will? generous to help me solve the problem!!!

The misuratorte mass air working properly?? the module that controls the westgate have you tried to replace it? sometimes leaves and resumes to me ? success on a bmw..

[rego88]

The misuratorte mass air working properly?? the module that controls the westgate have you tried to replace it? sometimes leaves and resumes to me ? success on a bmw..

not be ruled out as a hypothesis.... but having 13,000 km in the middle, I suppose much more of a problem map.... that maybe 99%, I attribute to the torque limiter, which I have omitted, because if you notice at around 3200 rpm, the limiter c'? a hole... and that regime me find myself on the middle....