meanwhile, do all the maps of the DW, but not so, not aumentatre the whole curve of 15%, increases the area of the cut of the pedal gradually up to a 20% increase from the low values unless you want the pedal more sensitive. You should take advantage of that part of the pedal unused that you have
I'd give you a look but I still can't, am newbie in this forum!
However, in my 1.9 f? the 240 (at the track) without raising the limiters of diesel, just working on timing and rail....a 2.4 cmq pu? become soooo bad!!!
you actually? was it intended my mod. since the values are so low, your perk? I want the pedal more? sensitive, now I have changed the map kn a gradual increase and then I fixed a p? 3D.Originally Written by franco75
I am attaching the mod.
Last edited by msport (exil77grande); 02-02-2013 at 01:38
by ke you get there early to 80 messages, since the experience would have and all the ke tips you can giveI'd give you a look but I still can't, am newbie in this forum!
However, in my 1.9 f? the 240 (at the track) without raising the limiters of diesel, just working on timing and rail....a 2.4 cmq pu? become soooo bad!!!
congratulations beautiful beast, qnti cavallini you pulled out of your, and ke mod. mekkanike have done?
miiiiiiii nn I to say so? ke nn us I sleep at night, pretty bad......mi sa ke domani the kiedo a p? of vacation to my boss, at least I dedicate myself kome should be in the map.
I have been many times l? l? to change it with a 2.4, just for that reason!
Mapped as the 2.4 ? a motorcycle!!! The latest Brera 200cv which I was dedicated, download the the odometer, no problems!
But the best part ? that f? 0-100 in a little more? of six seconds!
To my I put the downpipe with a catalytic converter magnaflow 200 cell in place of the dpf, obviously I have disabled the dpf and closed the egr with a plate (? important if you do not want to lose even a cv), I removed the swirl in the manifold, the mass bar domes, eibach springs and koni shock absorbers, mak alloy wheels (which weigh in at the met? compared to the ori), reinforced clutch, and then it seems to me that just....
Eheheheheh I would like to make anke a map similar to the BreraI have been many times l? l? to change it with a 2.4, just for that reason!
Mapped as the 2.4 ? a motorcycle!!! The latest Brera 200cv which I was dedicated, download the the odometer, no problems!
But the best part ? that f? 0-100 in a little more? of six seconds!
To my I put the downpipe with a catalytic converter magnaflow 200 cell in place of the dpf, obviously I have disabled the dpf and closed the egr with a plate (? important if you do not want to lose even a cv), I removed the swirl in the manifold, the mass bar domes, eibach springs and koni shock absorbers, mak alloy wheels (which weigh in at the met? compared to the ori), reinforced clutch, and then it seems to me that just....but they are only at the beginning and I know ke I have to experience a good p? to better understand what's involved in the different mod. in the map
Ps: the middle and great preparation
finally, sn was able to get to all of them, and 3, change in the table and then arranged in 3D, kme I said over my mod. was it intended in that way to get a quickness? response higher since the low.
what do you think of this mod.?
Last edited by msport (exil77grande); 02-02-2013 at 01:36
guardian, let the 3D, I do not say it is not important but to learn to interpret and modify the maps in 2D ? very useful, for the moment, not even I can look at you the file
you're absolutely right, I should take more? time to 2D, but at the moment nn digerisko own
Write permission
Quote
