I wanted to know if anyone has been closing in on this audi I have made as usually 16u3 the map in question ? a 16u31 and the machine has the fap, I think that a closure is always like those old or in these controllers will turn the light to attach .bin read with mpps and the .mod......
maps audi.rar
and the same procedure
I also saw I the procedure ? equal then the speech fap does not affect...... We say ? what I wanted to know....
the egr is used by the fap for the regeneration,then it would be better not to exclude the egr valve unless you also remove the fap
The car has about 288000 km never had a problem fap so if I exclude the risk of clogging.... The problem ? egr why? sometimes it freezes and the machine loses in performance I was thinking and if I close it, which is not completely...
according to me you can close it partially, in some cars in the vag group, you can even have it with the vag com and controllandoti the value on the exhaust gas up to close it almost completely, in order to keep an acceptable range.
And as it says in magi1984 if the fap is not good to close it appatto that you do not delete the fap
Unshared knowledge remains an end in itself.
ok I have the vag version to 10.6 with sw 908 I have not tried yet, but I have never had any positive results maybe I'm wrong channel? it seems to me that you have to lower a number....... but to control exhaust gas I do it with the vag......
you go in the module 01-engine-security access enter the value "12233" and confirm. Then go on a 10-Adaption and select the channel 3 by a stroke of the accelerator and shows you the value of "32738" and the value of the intake air. At that point, raise the value to reduce the movement of the egr. But as said magi1984 it is not expedient to close the egr if you still have the fap. I hope I was of helpOriginally Written by sno74
Thanks for the info but I tried it on, but on this version of the audi is not going prover? with another...you go in the module 01-engine-security access enter the value "12233" and confirm. Then go on a 10-Adaption and select the channel 3 by a stroke of the accelerator and shows you the value of "32738" and the value of the intake air. At that point, raise the value to reduce the movement of the egr. But as said magi1984 it is not expedient to close the egr if you still have the fap. I hope I was of help
Write permission
Quote