to tell you the truth, I have not used the pliers but an adapter such as the bdm, with the tips spring...
anyway I've welded and read, here's the correct file, thanks
to tell you the truth, I have not used the pliers but an adapter such as the bdm, with the tips spring...
anyway I've welded and read, here's the correct file, thanks
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
I know that I can't help you I have this but I know that ? a TRW 51795433, because it was saved in the wrong folder.
However, here it is, but I advise you to wait for those pi? equipped of me
Last edited by msport (exil77grande); 24-01-2013 at 13:18
if it does not adare that of the angel friend take a fiskio
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
if you have a tested solution ? better because? is the ecu I have to send it to mantua, and I am...not ? right here near
thanks
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
there is still something wrong with the reading does not come to me the size you read how to 95320
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
no, I read it as 25LC320 and as a programmer I wellon vp-590
I also xprog-m but does not support the 25LC320
I do a reading as 95320 and the place. however, the file of angel that he said to be a TRW 51795433 if I open it with HxD I see that ? a TRW 51746194, then my same ecu. should be good to go
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
I don't know t el?I said, unfortunately, was not well stored.. shame not to be able to try trial submit a reading as 95320 maybe legendaryslave has something more? safeOriginally Written by magi1984
this ? the reading is made as 95320 using xprog, the files being read are the same, the size ? different.
I believe that this was caused by some setting in the wellon set wrong, because by reading it with wellon as 25lc320 I create a string in the bottom of the file all at 00 00 00 00
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
however, by controlling the size of the file angel the same string ? also present in his file, in fact, the size ? identical to that of my read file as 25lc320, that ? pi? large file read as 95320
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
now to the soft the torma to the file
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Write permission
Quote
