I doubt there is a...but not ? the first fap breaking has clogged the drain in the valley of the same???
try to disconnect the exhaust immediately after the fap and misurai values of clogging...if you return to normal obviously, pieces of pottery of fap have clogged the drain line....
A rider does not create queues even in the car...
a automoblista create queues even on a motorcycle...
The spider mounts the fap type quaver at the centre of the tunnel ? hard that it cracks. I would say impossible if not deliberately. After c'? a straight tube up to the back. Much more? easy that the debris is not cleaned first,have clogged again the fapOriginally Written by munro
the old fap was still intact, for s? but the kat before (the small part always in the group fap) was damaged therefore you are? ? was replaced around the block because the customer did not want to defapparla.
Tell him to remove that break boxes of Fapsince I have a brera... and there are no problems
It is quite possible,get it tell me that on the fap I have a lot of experience to the job.
I can tell you that the catalyst is located after the fap if I remember correctly, and then to the exhaust
I correct myself,you're right, prior to the fap in those cars
cmq ? strange why? I reset last Friday, and after 4 - 5 days ? again clogged with error...
You managed to resolve the problem????
Really when you replace the fap, you have to replace all the sensors and probes, and then do the reset of everything, especially that of the pressure sensor diffrenziata that is very important,this should be the correct procedure,then we, as usual, we try to save the customer is not thinking about that at the first inconvenience to take it in the c... us
Unshared knowledge remains an end in itself.
Write permission
Quote