hi guys..I have a little problem..from few days I am equipped to galletto1260,I tried the scodifica a 59f m3 with pin boot.everything is ok ,then I tried it with 59f m2 hw002 but I notatto that in the inner part there is no pitch to the pin boot ,then I assume that this task is not feasible.but can you tell me which tool scodifica this blessed iaw59f m2..and what it might cost.
read on to tour as a hybrid motorola, but I doubt that the scodifichi so, I also have a post open for an experiment that I want to do on a 003Originally Written by dainty
hi guys..I have a little problem..from few days I am equipped to galletto1260,I tried the scodifica a 59f m3 with pin boot.everything is ok ,then I tried it with 59f m2 hw002 but I notatto that in the inner part there is no pitch to the pin boot ,then I assume that this task is not feasible.but can you tell me which tool scodifica this blessed iaw59f m2..and what it might cost.
for the solution c? the appropriate interface. it seems to me costs about 200 euro.
if' hw under 100 is not in the boot mode serves a dedicated interface!
You do not really understand something until you can explain it to your grandmother (Einstein)
and yes , the interface to mail.
thanks alex ..now I will try. very nice,,,
what would be the interface to use!
c, and there are several on the market that, from 200 euro to those + professional where definitely make 59f 002 and what + trivial to do
excuse, I forgot, of course, without opening them or make holes
Write permission
Quote