I agree
I don't understand you insist to say diesel
If the diagnosis from the failure on the sensor or phase ilbproblema and them
If you are hungry, you drink a glass of water?
I you are on a diet aahhahaha
I agree
I don't understand you insist to say diesel
If the diagnosis from the failure on the sensor or phase ilbproblema and them
If you are hungry, you drink a glass of water?
I you are on a diet aahhahaha
I check the phase in the specific key pulley camshaft and check the crankshaft sensor of the same if everything is in place, check also the toothed pulley crankshaft often break the stick, die-cast because of the tightening is carried out with air gun attention should be tightened with torque wrench and its counter-torque tool
When the car ? game is good?? has a satisfactory performance??
The car will be fine.I am the end and went to perugia.nonperde couple beats runs normalOriginally Written by tezzero
Only snag or cold or hot must turn at least 2-3-4 times
And then part the rest is perfect, and I repeat, in diagnosis only that error.
I gather that for racket means the template that goes on the crankshaft pulley to the stage.
sorry for the titardo the answer is the template that you place on the motor shaft in the shape of a racket typical de jtd and I saw that the case ? massive fixed makes me happy
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Then you do one thing in the mail all the complete data of drive type motor kw and cos? we take away all the doubts of the phase or timing tools.....
hello sno74 in these days, I should bring the car and I'll know in the first place the data so you can see what it is,anyway, sn of the idea that it is not the phase because the mass infase I pulled the belt or forgiven the precise points of the new belt and then ammeno that,don't bring the stick below that in the motor shaft
and is moved to the cmq, which I have not unscrewed because it brings only the screws of the pulley,,,,according to me ? press diesel then I can also make mistakes -....
anyway I cio also ******** and is perfectly in phase,,,,and then let's be clear, the machine goes very well ? went to perugia and back the machine goes a bomb l,the only thing the you know what for both hot and cold....va bo I know.....
Last edited by msport (exil77grande); 14-01-2013 at 23:56
hi guys finally fixed everything thanks for your help and you are big in the end you had to reason with the people that said that it was out of phase when in fact it was the pulley under
of the motor shaft so as to have someone call the (Racket) .....as a result, still fortunately I had du the same machines, and I've done some tests anyway thanks again closed discussion...
Hello, sorry to hot as well?
Write permission
Quote