Page 1 of 5 123 ... LastUltima
Results 1 to 10 of 42
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    Bolzano
    Messages
    188

    Alfa spider problems after sost fap

    Hi all, I have a problem with a A. r Spider 2010 I replaced the fap filter why? broken physically as the car must be sold and after the replacement of the Dpf is present, the signal on the body computer filter clogged although it is new and clean. I performed the replacement of the dpf in the ecu, but the error persists what can I try to make. Not ? registered no error in the ecu.

  2. #2
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    by more info on the car,you have adequate diagnosis of replacement fap? the probes are ok?
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    Bolzano
    Messages
    188
    then the car ? a ? an alfa spider 2.4 jtdm 2010 in diagnosis, I executed the replacement of the particulate filter so as to recover all the parameters of the fap. The parameters of km from the last regeneration, etc. are reset but the clogging ? remained at 126%. Now, I have not yet tried to perform the regeneration of the fap also because I don't think it is as really? the filter ? fully clean.

  4. #4
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    if you've reset all the parameters something is not right,it may also be caused by some of the probe.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  5. #5
    THE AVERAGE USER L'avatar di Tom79
    Date Of Registration
    Dec 2012
    The resort
    Bolzano
    Messages
    92
    with that software you have deleted error ? and the procedure for the replacement of the fap I hope you have done with ***********..

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    Bolzano
    Messages
    188
    the sw I have performed the reset of the fap ? a sw that damage comes with the interface wow snooper. For? the procedure ? come to a good end.

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    Bolzano
    Messages
    188
    the probes were all put back properly and have never been disconnected from the electrical part, but only removed from the old fap and put back on again. I have to say that before with the fap broken physically, he is not reporting to fap on the body but only the error in the ecu, "limit efficiency dust filter low"

  8. #8
    THE AVERAGE USER L'avatar di Tom79
    Date Of Registration
    Dec 2012
    The resort
    Bolzano
    Messages
    92
    I suggest you ***********, with this software and a ELM327, you can do everything on the machines of the group FIAT,ALFA, LANCIA, use it for a while ? goes to great, you can also see the KM in the real machine

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    Bolzano
    Messages
    188
    ah I understand interesting to see? to get it then.
    Strange because I usually have always done everything with this sw that I had. ? the first time that I find myself having to replace the particulate filter and having to fix the electronic problems connected to the new fap

  10. #10
    THE AVERAGE USER L'avatar di Tom79
    Date Of Registration
    Dec 2012
    The resort
    Bolzano
    Messages
    92
    On *********** ec the function of the replacement of the fap, and I can guarantee you that it works.. I have tried this feature in person

Page 1 of 5 123 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •