cutting file me7.9.10

[legendaryslave]

yep, I read a file into the boot of a 500 abarth with fgtech2 and I jump out the file size 869kb how do I cut for titanium to 832kb
I attach file thanks in advance

[coma]

I have explained to you the technique on my post of the myth.
however, I am attaching the file cut

[msport (exil77grande)]

I have explained to you the technique on my post of the myth.
however, I am attaching the file cut

coma maybe the write step-by-step here, so remains for a possible future research for other because of the title.

[legendaryslave]

you need to cut from 00008000 to 0000ffff
so to remove a block 64k bytes starting from the address 000080000

[coma]

here it is:

go to the men? "tools"
then "conversion"
then "cut and paste files"
open the file you want to trim
starting in a low voice, "user defined"
then in the start box, scirvi 010000
should ridarti a file from 832
attention to? who doesn't ? compatible with scripture with magpro nor with MPPS
the file alien or mpps are 832 but the first area is slightly different.
in short, they read differently.
If you have further concerns, you have to do is ask!!!!

[fa2st]

this procedure must be done for all the times that you write by obd the 7.9.10?? if rewrite with gallo v2 or kessv2 official I have to do the cutting of the file? THANKS A LOT!

[coma]

No,
Used only if you read with Rooster v2 why? otherwise, the Titanium does not recognize the file.
Then if you write with the cock the size must be a whole
Then as I have already? said the file cos? cut not ? compatible with kess and other

[sno74]

but with this procedure I can cut the file read with mpps

[legendaryslave]

I'm not sure but mpps in the boot should read from 832kb but we don't put your hand in the fire' cause I've never tried

[motorsport]

I hate to say this,if you can cut it with titanium beginning from 010000 goes to cut the first area that reads the cock that we find in the data,in fact if you cut the area 08000 goes to cut the zeros that there are data that are interested!!