opel zafira year 08 1.9 mtj 120 hp 8valvole.....

[michell]

hello there and never come out to this machine we put so much time starting and diagnosis is the sensor phase of the cam ,however, and the model 8v
and then the door to the inside of the pulley of the distribution ...
I have changed 2 to test also that of the motor shaft spins marks the righteous,those of the tree 850giri and the cam 425giri is making me a little crazy because if it is problem of diesel not I should give in diagnosis that error ....anyway someone can give me info thanks raga.....

[FidodidoTuning]

Often, and the phase is not perfect...

[sno74]

according to me that is signs camshaft sensor ? normal to me was the case with one that would not start ir? in the diagnosis gave me always camshaft sensor I replaced then the problem was in the system of the diesel fuel, have you checked the low pressure all ok.......

[carlo abarth]

if you drag and drop the motor a bit of time can also give that error even if it is not him !!! try to monitor in the start-up pressure diesel fuel and everything else!!!

[FidodidoTuning]

If the error on the sensor of the problem and in that area
Certainly not for diesel
Check also the same crankshaft camshaft...where it reads the sensor

[michell]

If the error on the sensor of the problem and in that area
Certainly not for diesel
Check also the same crankshaft camshaft...where it reads the sensor

I made the distribution now, in fact, the first put it up when I changed the belt , the second after a two-hour ....got to the point I am ,I believe that this error is like that of the phedra that every failure brings you always the same words......I have to check the pressure diesel in everything and for everything---.... you are, what you have changed or found????

[sno74]

you are right in the first place a controllatina to the stage, then go with pressure diesel these for the phase I know that you need to dime..............

[michell]

you are right in the first place a controllatina to the stage, then go with pressure diesel these for the phase I know that you need to dime..............

such as dime has all the points ,just that you put yourself in the phase before removing so you signs the comerail and go ...

[sno74]

such as dime has all the points ,just that you put yourself in the phase before removing so you signs the comerail and go ...

you're right, the template should be only for 16v as insigna for? the problem was before doing the belt when you did the belt for phase control........

[michell]

you're right, the template should be only for 16v as insigna for? the problem was before doing the belt when you did the belt for phase control........

no already before and came up with this problem ,and it does it for both hot and cold.....