first map bmw edc16

[E92_mpower]

thanks for the important tips that are giving me now I have no way to apply the changes to just do the whole place

[E92_mpower]

there we are
then I left the first 6 gobbette stock as said and incremetato the other 5%
starting from the 1500giri in then I put the photo of the 2D one ? to see the starting point of the other to see all the parts increase

address 0D7644 mod correct 5%.jpgaddress 0D7644 mod corretto.jpg

[munro]

still no go well..according to me....zoom the map with the ecm and controls better..the first two curves are still moddate even with increases in negative....

[E92_mpower]

I arranged to watch now
address 0D7644 mod correct 7%.jpgaddress 0D7644 mod corretto.jpg

[E92_mpower]

ilproblema of the data in the negative ? that I was not able to return the selection as ori

[munro]

enlarge curves in 2d by varying the reference scales in the top right of the screen....you can vary as you want..if you zoom in and easier to put it all in norm...

[E92_mpower]

where c'? written 256x1?

[munro]

now it's ok...the size can vary by changing where c'? written 256x1 and where c'? written 63546.....
now switch to moddare maps lambda...

[E92_mpower]

now it's ok...the size can vary by changing where c'? written 256x1 and where c'? written 63546.....
now switch to moddare maps lambda...

hahahahaha and where is it located?? or better know as the calls ECM 6.3 in its menu?

[munro]

hahahahaha and where is it located?? or better know as the calls ECM 6.3 in its menu?

in the screen of the display 2d of the ecm to the right in the gray menu are written "uses info driver" just above this wording c'? a box with the selection read size of the file in the screen you posted ? set to 65536...something like this...