BDM - Clarification

[saivivere]

if you do the reading with the serial you can only read the flash of the ecu, the backup you can do that are in the bdm, but why? read the entire contents of the ecu, then ? good idea to make a backup before write via the serial port. If the writing were to go wrong then you reopen the ecu and rewrites always in the bdm. The reconstruction of the file is only if you have not made the backup copy.

[blackwolf76]

if you do the reading with the serial you can only read the flash of the ecu, the backup you can do that are in the bdm, but why? read the entire contents of the ecu, then ? good idea to make a backup before write via the serial port. If the writing were to go wrong then you reopen the ecu and rewrites always in the bdm. The reconstruction of the file is only if you have not made the backup copy.

thanks for the clarification... in the end I had well understood, even if the address of the ecu full and I hadn't understood, arigrazie.

[frantik3]

depends, I never do a backup except for the edc17 that I always do in boot mode as those if the blokki not the resume

[saivivere]

depends, I never do a backup except for the edc17 that I always do in boot mode as those if the blokki not the resume

which tool do you use to read the edc17 in boot mode?

[frantik3]

FgTech or cmd depends

[saivivere]

ok perfect, thanks!!

[dvdtuning]

ok...but in the list of compatible cars not edc16c39 but does the same?

[saivivere]

On which car ? installed the ecu? model, year, and hp.

[frantik3]

you have to feed the ecu if you use a bdm clone why? you does not identifies

[dvdtuning]

On which car ? installed the ecu? model, year, and hp.

No, I was wondering seeing that on the list there