Page 3 of 4 PrimaBefore 1234 LastUltima
Results 21 to 30 of 37

Discussion: 159 150HP "strength"

  1. #21
    THE AVERAGE USER L'avatar di tezzero
    Date Of Registration
    Sep 2012
    Messages
    224
    with the fap attention to the engine oil that you use..oils contain metal particles that, if larger than the holes in the block is..be sure to follow the specifications of the oil recommended by the manufacturer

  2. #22
    THE AVERAGE USER L'avatar di tezzero
    Date Of Registration
    Sep 2012
    Messages
    224
    I was wrong to write..not particles above the hole...

  3. #23
    THE AVERAGE USER
    Date Of Registration
    Dec 2012
    The resort
    The province of Caserta
    Messages
    335
    I don't know what oil they have used for? the car runs only a couple of miles at a time, home and work. The foot of the person riding it ? very light. Then ? was taken as well used..
    anyway ? true that oil ? important, but from now on there will be? pi? this problem

  4. #24
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    Bolzano
    Messages
    188
    Citazione Originally Written by tezzero Visualizza Messaggio
    with the fap attention to the engine oil that you use..oils contain metal particles that, if larger than the holes in the block is..be sure to follow the specifications of the oil recommended by the manufacturer
    In fact, as bardhal has the line "green" low saps that ? a diff oil from the classic xtc especially for cars equipped of the punishment of the particle filter. Even if I sincerely thought they were only, say, marketing.

  5. #25
    THE AVERAGE USER (OF)
    Date Of Registration
    Jan 2013
    Messages
    89
    buond?,I ? happened with a peugeot 807 2006....was not pi? even on the floor almost.the owner tells me it is ? turned on the engine failure and the writing of the dpf clogged,you don't actually drained almost nothing from the exhaust would have to do the cleaning in the aut. but not ? state cos?,I removed the fap and the fact clean now the auto v? quite well except that when the reminders to speed? high for a p? miles v? in recoveri, control unit engine failure on and the car is not good salt of the speed with the diagniosi I have not encountered any errors stored in the ecu,after 5 min ? firm returns to go on like nothing had happened.

  6. #26
    THE AVERAGE USER L'avatar di tezzero
    Date Of Registration
    Sep 2012
    Messages
    224
    Citazione Originally Written by nico2610 Visualizza Messaggio
    buond?,I ? happened with a peugeot 807 2006....was not pi? even on the floor almost.the owner tells me it is ? turned on the engine failure and the writing of the dpf clogged,you don't actually drained almost nothing from the exhaust would have to do the cleaning in the aut. but not ? state cos?,I removed the fap and the fact clean now the auto v? quite well except that when the reminders to speed? high for a p? miles v? in recoveri, control unit engine failure on and the car is not good salt of the speed with the diagniosi I have not encountered any errors stored in the ecu,after 5 min ? firm returns to go on like nothing had happened.
    which diagnosis do you use??

  7. #27
    THE AVERAGE USER (OF)
    Date Of Registration
    Jan 2013
    Messages
    89
    hello tezzero,thank you for your interest...diagnosis ? a reflex 3130

  8. #28
    THE AVERAGE USER (OF)
    Date Of Registration
    Jan 2013
    Messages
    89
    I also tried with the 4130top slr top,idem no abnormality.

  9. #29
    THE AVERAGE USER L'avatar di tezzero
    Date Of Registration
    Sep 2012
    Messages
    224
    find a friend who has the KTS bosch and you'll see that the error pops out...

  10. #30
    THE AVERAGE USER (OF)
    Date Of Registration
    Jan 2013
    Messages
    89
    thanks tezzero you do? know

Page 3 of 4 PrimaBefore 1234 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •