elimination maf edc15-16 talk about it..

[kingsnake]

What are the addresses to delete the dtc and where is the map of the map on this file?

[munro]

prover?...thanks for the info...

[tranky]

Nice discussion of sin that you have gone OT for most of the time..
Hours we try to resume the discourse, and perhaps to have the right info related to the topic.
I have a edc15p vag group, which has been removed physically, the mass air flow sensor, and of course, now the car has no error in ecu.
Place the file ori and the errors:
17552 - Mass Air Flow Sensor (G70): Open or Short to Ground
P1144 - 35-00 - -
19561 - Shareware Version. To Decode all DTCs
P3105 - 35-10 - Please Register/Activate - Intermittent

One of the errors should be inherent in any error made by the owner in replacing the pipes..
You know give me directions ?

[msport (exil77grande)]

hhhmmm 27 visits up to now ? no one says anything??

I know that it is not so simple as you think.........

[isfedale82]

could a p? I read that this mod is based on the elimination of the maf and it is all based on the map sensor swichando mainly the fumes map from maf to map, in fact..
for edc15 for example, if I'm not mistaken there is the polo-golf sdi sucked that has no mass air flow sensor might be useful to compare the files of these cars with those of the same group to see the differences...
what do you think?

hello I have a class A 170 cdi that does not bring the mass air flow sensor, at the beginning it was strange to me why? comparing it with the other two they had, I noticed that is missing the wiring from the control unit should be cos? from the factory

[rego88]

can I post here the file ori and mod that I suppose that is??? who has a damos or a2l a edc15c7???

[msport (exil77grande)]

munro placed the screen

rego88 you if you have a sample file ori and mod tested that you want to share post it in a new post in the ecu section or diesel then I'll move into off-limits, so that it remains semi-invisible.

[rego88]

but what can I say ? this.... if you disconnect the maf on the edc15c7 ? much more rapid in increasing rpm the car but it smokes a bit... but the other 2 remain almost unchanged.... how to remain unchanged values.... on edc16 how do I then raise the value of the meter????

[isfedale82]

Hello isfedaele82....this is a strange thing that you say to me...you have a way of reading the file to your ecu and post it? I would be very curious to study it a p?.....

hello ? in the countryside, why? ? accident-free, how can I post

[isfedale82]

Hello isfedaele82....this is a strange thing that you say to me...you have a way of reading the file to your ecu and post it? I would be very curious to study it a p?.....

I apologize for the wait I have not forgotten the promise