opinion the map edc15p golf4 101cv

[alfetta80]

hw 0281010663
sw 1037362609

thanks msport!!!..

[alfetta80]

but on the map the pedal and on the limiter fumes IQ are already in mg?? or are in mm3?

[frantik3]

but on the map the pedal and on the limiter fumes IQ are already in mg?? or are in mm3?

here's answered

[munro]

are mg/i...

[alfetta80]

are mg/i...

thanks munro!!
for torque limiters can someone give me an idea of how to think ??there are three limiters all three the same!!I don't like to copy, and just to at least understand a little bit!!another thing with mppsv5 there are problems to write on this edc15p101cv??thanks?

[munro]

I usually respect the percentage of the difference in gold between the driver's wish and lim torque....then if I raise the DW of 15% at a point in the lim torque alzero the request is not in the function of the 15% most of the increase in DW but always in respect of the difference that has given the manufacturer between the two based on the new "request"...

[alfetta80]

I usually respect the percentage of the difference in gold between the driver's wish and lim torque....then if I raise the DW of 15% at a point in the lim torque alzero the request is not in the function of the 15% most of the increase in DW but always in respect of the difference that has given the manufacturer between the two based on the new "request"...

in practice, if the ori in dw I find it to 2500 rpm 50.00 mg of diesel oil in the torque limiter can't find 44.00, if the increase from 50 to 60 in the limiter'll put' 54??or do you understand??

[frantik3]

mg of the photos that I posted are too small when I attach

[frantik3]

I hope now you see

[alfetta80]

I hope now you see

you can see very well, thanks!mache program do you use?