ok the map be modified in accordance with your advice... I also fixed the first (iniez. prov.)..
If you want buttaci an eye..
For the EGR I went to see the help and the screen, but EDC16U31 not c'?.. should have 4 cakes to bring to 0 as I understand, but I can not find.. c'? one way in particular?
oh I forgot.. the method I used interpolation... I discovered it recently and ? really comfortable.. in ecm2001 was not there..
there was also in the ecm,for the guide here to message 2 http://www.professionalchiptuning.ne...po-bosch-edc16Originally Written by Gianpy80
just select the start and end of the 2 panettone and click on the m lower-case,if the file and 2m it should be 4 and still as a reference you have to scroll in 2d after the injection phase.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
ok, we should be... for me? I only found the ones for the screen (one small and 2 large) and I've taken them to 0..
I put the link of the mod...
the big ones are starting to address 1C9DB8, the small 1C9CC6...
Last edited by msport (exil77grande); 05-12-2012 at 17:09
edit...
I found the other 2 panettone large and a small one at the address 18B73A
this ? the mod..
It is closed now?
Last edited by msport (exil77grande); 05-12-2012 at 17:09
c? a further map of enrichment and acceleration out of the driver at the address 1c3402
from the address 1eb766 and then there are the other two maps limiter turbo out driver
for the egr return the original to the address 18b854, thou hast cleared from that bit but ? wrong. ditto in the address 1c9db8 and 1c9de6
rest doubts about the percentage of increase date of injection zoned, map1, map2, and boost x rpm why? according to me ? too high as the increment.
however, on the whole, the map pu? go, system errors on the egr and give it a try and see how it goes in the machine
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
Ok, I did the changes I have indicated, and I have uploaded... now the car drives really well...
For the EGR I have connected the diagnosis and the percentage of "duty cycle EGR" ? fixed at 95%, while the first ranged ? just so??
As soon as I have a moment I try to edit those maps out of the driver that have marked out for me.. Anyway thanks for everything, you've been very kind..
hello to all. I have to say that I still can't view the map in question,
but on these cars are exactly what manages the map map1? I had read around that ? a map lambda..
and map2 seems to be a map of injection duration as well as the boost x rpm. Now between these 2 what? the difference? it may be that map2 is a duration limiter?
but what map1 do you mean? injection choked? in this case it is the map of fumes or limiter fumosit?...
no you can take into account the names of the data from the ecm , you have to first know the real name of the map, or use a language that you understand.
ecm is not used after you understand that nn is as driver. use titanium, already goes better. the maps from the tap are, pedal, torque limiter, and the timing of fuel injection ( diesel ) , turbo pressure, lim pressure turbo and that's it.
you enough to make a change. I can still download if not I gave the address and how much to increase.
the classic rise and 1500 rpm and 50% load.
good job.
Write permission
Quote