Map Info injection times....

[tezzero]

I have a thought...try to use a standard methodology as stated in the first post that if done well with good results with development times are not too long..then if you want to make maps from formula one and try to find the coat in the egg, you really have to dedicate so much time and make so many tests...but not ? certainly within the reach of all...

[marco]

you hi I inbuco well I wanted to know if you do a mapping media and touches the limiter giriturbina and shot it may be fine to drive disel?

[Chris156]

you hi I inbuco well I wanted to know if you do a mapping media and touches the limiter giriturbina and shot it may be fine to drive disel?

You need to understand for the map mean what you mean.. if you are talking about a few horses can be good, but all should be given with the policy.

[marco]

bungiorno I mean that the car ori. can not bear of the parameters of the 50%+, and then if by a 10 x% on the turbine ignition zoned and give you 350 points on the limiter rpm without touching the other can go be. I am referring to auto alfa 159 jtdm 150 hp thanks.

[msport (exil77grande)]

bungiorno I mean that the car ori. can not bear of the parameters of the 50%+, and then if by a 10 x% on the turbine ignition zoned and give you 350 points on the limiter rpm without touching the other can go be. I am referring to auto alfa 159 jtdm 150 hp thanks.

hello mark, unfortunately, you speak only of increments, but it's not so simple, because everything is calibrated with one another.

[explode82]

quoto in full,for certain things, you need to use a p? policy otherwise are not made well

[marco]

are you or understand, however, decided lighthouse the course because if we want to understand something you have to study as with all things

[Chris156]

map your car ? very simple, but take a course to understand the different logics of the ecu would be a good thing!!!

[explode82]

do a course ? ok, and it's good,but ? just for the basics, and only one ? however little,it takes different and more and more? in-depth as the salt ****llo of the knowledge that you have

[Chris156]

munro I fully agree with you, and trust that I don't think I'd get the slightest bit bad about certain statements.. what you say ? the sacrosanct truth, c'? people who shoot percentages on the various maps without knowing really what they are doing..only heard about it or only because so does not smoke..
I am here to help, and maybe to learn, and I assure you that there are so many things that I don't know' !!!
the problem that you have exhibited on the mechanical changes that were made years ago and those who are now electronically at the end are the same..just that now even if you do not understand anything of the mechanical part you're always a professional!!! just by percentages!!!
Sorry to me ? what I think...