interesting this file..Originally Written by pinuzzzz
interesting this file..
Good evening to all
Should I do immo partial or total up to a 16F IAW of a panda 4x4 2005.
I have read around that there is the possibility of a scodifica simply feeding the Ecu and putting in short circuit 2-pin
Someone kindly can enlighten me on this procedure?
Thanks a lot
I repeat, you have to take a M27c512 we write the file clock that you can find easily on the net. Attacks the ECU turn on the picture for 30 seconds,disconnect the ecu re-mounting the memory and the original auto part. Verify that the memory is positioned with the breadboard or soldered onto the board. In the second case dissaldi and put on the plate. All you need is a programmer type, UPA , Willem TL866.
to make the 16 f the need of an interface option which is mentioned at the first pages and the appropriate program v1exe
The 16f I know you scodifichino with file clock written on M27c512 virgin, which replaces the original extracted from the board. He turns the picture for 30 seconds, turn it off and rimettre original chip and the game is done. Am I wrong?
You can do both from flesc that micro...I micro with appasita interface, and program v1exe....the 16f the ago, but the 18f no, and I do not understand why
a question...but the m27c512 should be new or you can overwrite it?
sorry but I have not finished the response, the original can also be without the window, in this case, you can delete and you can rewrite, you need to find one of those erasable.
ugo ---- president A.E.P.
the 27c512 have above the window to delete it, then you can rewrite.
ugo ---- president A.E.P.
thank you...very clear now
Quote
