Scodifica total FIAT Punto marelli 5AF

[gimarras]

I made the scodifica total Marelli 5AF a 1.2 petrol but the car is not starting why should I bypass the can line and I can not find directions on how to proceed. I just go into the bike then any problems do not interest me.

I should first of all locate the related wires and then? I just have to stop them? Only one or both lines (Hi and Low)?
Thanks to anyone who can help me, are struggling with scodifiche after a fire in the workshop that destroyed the keys of the cars for sale or repair.
thanks to anyone who wants me to give a hand.

p.s. I have another question open about scodifica.

[cinqueturbo]

my programs don't say anything on the stop wire.
says just Program the ST10F168/ST10F269
you speak of the small ecu hibrida??

[gimarras]

Yes, that's it. Made with Marelli Tuning but not part of it.
I bed to intervene on the Can bus, as well as during the ignition communicates with the Body, and resumes the code. A car electrician reported they have entered a relay for the first few seconds disconnect the body to allow the power, and then restores the line so that everything works.

[cinqueturbo]

perhaps another software is not necessary? upload the file...

[gimarras]

I have not read. I connected the ecu to the tool that makes scodifica in autonomy. At the end identifies it as scodificata total (the other option was a partial virgin). So I think that's scodificata but I read that when power resumes the code from the BODY that does not allow the start-up and this requires you to stop the can line but I can't find specific instructions.

[cinqueturbo]

****** and your friend Iaw_59F.xx_-5AF.xx.png.b8a5c5ba686874e11c8cd85215ffb032.jpg

[gimarras]

Nothing. I have interrupted the thread of the PIN 29 but not part of it. I am ashamed of: not being able to put in motion a grinder is embarrassing yet, there will be a way. I am sure that the ECU is scodificata, the tool has always worked so I have to find a way to get it to start, even with the lights turned on and the middle picture is not working.

Thanks cinqueturbo for the answers.