learn how to recognize the maps

[tranky]

If it is a edc15c in map pedal you have the required iq in mm3 without conversion in nm... this(the conversion in the special map) is for EDC16-17..

understood.
thanks

[munro]

The edc15 are based on the model of the injected quantity..
While the edc16-17 are based on the model of torque..

[tac89]

I just had the time to enter the map in the car, only that I do not hear marked improvements at least at first glance
Perhaps due to the filter of the adattivita short I will try to delete the egr, perhaps, so I hear qualkosa under the seats... Tips welcome to all and good weekend

[tac89]

I open this post to know if anyone has any damos for this ecu with conversion

[lsdlsd88]

can you please post a mappack found and fixed, does not align to yours then you will have to trasferirtelo

[lsdlsd88]

I gave a look to your map, you'll see with the mappack that you have forgotten some of the torque limiter and iq, then lift up the pedal.

the maps duration injection I do not touch almost never quite up lim fumes (no exaggeration).

keep in mind that this has the wastegate mechanical so if you do not act mechanically, you're not going to raise the turbo pressure, so you'll earn very modest.

[tac89]

I can't find the maps 72794 and 72430
while the 72794 should be to the address 73234

[tac89]

could you explain the operation of these maps
72588
72430
I understand your contemplating on the timing inj to the end and a map calibration and editing trickery to the ecu on the amount inniettata
to verify the prex turbo do I have to install a pressure gauge to measure it.. then as prex can endure? it would take a turbo map. then I start on the ac**** trying to inniettare a certain amount of iq.. then I'll do a log.. thanks for the mappack

[lsdlsd88]

Well the pressure you can see and record if you have a decent diagnosis

Indicatively it up 100-150 mb does not create any risk