PUNTO EVO 1.3 95CV 232 - 00P opinions and advice

[salvatoreragonese]

Ok I agree! And don't let it drop?

[Errecinque]

Ok I agree! And don't let it drop?

If the torque limiters and iq, you have unlocked all you need to increase the request.pedal in.the range of laps in which to cala. Remember that the curves of the pedal in 2d should be read to the contrary

[salvatoreragonese]

If the torque limiters and iq, you have unlocked all you need to increase the request.pedal in.the range of laps in which to cala. Remember that the curves of the pedal in 2d should be read to the contrary

hello errecinque. I'll tell you the truth I think I have them unlocked if you get the chance can you give us a look? about the pedal, and then did so, and that is bad for you?

[cinqueturbo]

hello errecinque. I'll tell you the truth I think I have them unlocked if you get the chance can you give us a look? about the pedal, and then did so, and that is bad for you?

But this map lai proven?
that defect notice?
what would you improve?
smokes too much?
let me understand better..

when you have a doubt on the performance of the maps, why not do the simple tests and you remove the doubt?

[salvatoreragonese]

But this map lai proven?
that defect notice?
what would you improve?
smokes too much?
let me understand better..

when you have a doubt on the performance of the maps, why not do the simple tests and you remove the doubt?

then the map goes pretty well. what I would like to get from this machine is more power from 1900 rpm 2700/2800 with all the gears and I don't want 5th gear to stop at 4000 rpm. the problem of the low rpm seems to resolve slightly going to mod 1d5084 and set it to 12800, but as soon as this is done the machine begins to smoke and consume a bang.you can do anything?

[cinqueturbo]

then the map goes pretty well. what I would like to get from this machine is more power from 1900 rpm 2700/2800 with all the gears and I don't want 5th gear to stop at 4000 rpm. the problem of the low rpm seems to resolve slightly going to mod 1d5084 and set it to 12800, but as soon as this is done the machine begins to smoke and consume a bang.you can do anything?

Use Winols?
begins to give a look..

[salvatoreragonese]

I thank you but winols does not L I never opened so I don't know where to put hands. I try tomorrow thanks

[cinqueturbo]

I thank you but winols does not L I never opened so I don't know where to put hands. I try tomorrow thanks

And then? want to map this car, and you want to pull in behind before a software?

[salvatoreragonese]

And then? want to map this car, and you want to pull in behind before a software?

Then yesterday I opened the program with the map but I'll tell you the truth, I read the addresses, and I gave in meal to the ecm I found some interesting thing, as soon as I place some of the addresses. And think it through on if you like

[cinqueturbo]

Then yesterday I opened the program with the map but I'll tell you the truth, I read the addresses, and I gave in meal to the ecm I found some interesting thing, as soon as I place some of the addresses. And think it through on if you like

Ok.. but you see that the ECM fires ca..ate..