I have tried to modify the file read from the ecu by cutting and then merging it...write it on the ecu is 100% error...the machine will not start. If I put back the original, I have no problem as ever?
I have tried to modify the file read from the ecu by cutting and then merging it...write it on the ecu is 100% error...the machine will not start. If I put back the original, I have no problem as ever?
There is there is it just that you can not download attachments or see images..Originally Written by raffaele25
wait, so the other bit and read the various posts to find you forward while you hit the skill..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
How do we know what are you doing?
I can only assume that you have not cut re-united modato the file correctly or the tool does not correct the checksum boo..
attach the file..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Here are the 2 files one original and the other modified...I have read and scrvere I used galletto v54
as you may have made to attach files?
however, those discussions there is the solution to your problem on the release of the butterfly, no matter who your is or less turbobenzina
I gave a reading, but I did not understand much since I can download anything
as I have time to do one-of-line..
Can attach but not download..as you may have made to attach files?
however, those discussions there is the solution to your problem on the release of the butterfly, no matter who your is or less turbobenzina
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
As I thought you made some error in the paste the file..
besides that the mod that you made are without logic...
a council please contact the Professionalchiptuning that with a little will give you the maximum.
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
But, in fact, was something done to the eye just to try if the file was leto from the ecu... anyway tell me how I have to combine the two files once cut?
or maybe write me the address of the curves of the butterfly forever if you can and want
hello when editing the file should be also removed the butterfly in the manifold?
Quote
