EDC16C - impariamola!

[MCDJ90]

Hi, here I am after the first test write to the ecu, as a guinea pig for my poor alfa 147, I was surprised by the raidità, to read it it took me an hour to write it about a minute including power off and back on, the picture at the end!
Is it really so quick? I had also connected the booster on the battery to avoid any surprises, and I was surprised I!

Gia, I am, according to your experience, is there a way to know which devimetro port on my alpha? I have seen three models with the three codes, the deco for the force to disassemble the device to read the code?
Greetings to all
MCDJ90

[enrico pontoni]

Hi, here I am after the first test write to the ecu, as a guinea pig for my poor alfa 147, I was surprised by the raidità, to read it it took me an hour to write it about a minute including power off and back on, the picture at the end!
Is it really so quick? I had also connected the booster on the battery to avoid any surprises, and I was surprised I!

Gia, I am, according to your experience, is there a way to know which devimetro port on my alpha? I have seen three models with the three codes, the deco for the force to disassemble the device to read the code?
Greetings to all
MCDJ90

mmh, probably you have selected something strange on your writing instrument then depends from ecu to ecu, my kess, however, is 5 min to read and 3-4 to write about almost all of the edc16c

[MCDJ90]

I have not changed any parameter from the screen of the software, only the driver is selected, read ecu data, uploaded the file and clicked on write, if I'm not mistaken from the screen did not give me even the chance to select anything, then I have not checked in settings.
However, it seems that he has written well, the egr not to malfunction, valves and the swirl from the map are always a percentage of 4,996% then should be ok.

[enrico pontoni]

I have not changed any parameter from the screen of the software, only the driver is selected, read ecu data, uploaded the file and clicked on write, if I'm not mistaken from the screen did not give me even the chance to select anything, then I have not checked in settings.
However, it seems that he has written well, the egr not to malfunction, valves and the swirl from the map are always a percentage of 4,996% then should be ok.

but in addition to the egr off and swirl off you have done nothing?

[MCDJ90]

No, nothing else! I don't think I still have the fiuste skills to try to do power increase

[enrico pontoni]

No, nothing else! I don't think I still have the fiuste skills to try to do power increase

get a damos and began to study it you'll see that you can make it

[MCDJ90]

I started to search on the net, I have still found nothing for my controller, once teovato I understand that must be used with a software to read and edit it, right?
Avresi tips on where can I find it?

[enrico pontoni]

I started to search on the net, I have still found nothing for my controller, once teovato I understand that must be used with a software to read and edit it, right?
Avresi tips on where can I find it?

The damos I can post it, you get a version of winols that functions

[Errecinque]

Here is the damos inherent in the discussion. For your map it is best that you open a topic your if not this becomes a casino

[MCDJ90]

Many thanks to the damos, but unfortunately I can not still download it! I am recovering the winols, ok ok the apriró as soon as I have everything you need then!
While here I will remain, possibly, to ask for general information regarding the series edc16c39
In relation to this, some posts back I had made of the evidence relating to the dtc, if you have a opposite of time *errecinque you tell me what do you think? And if I knew where to begin the tables dtc?
Thank you all as always for the help!