hello all as the title I wanted to know who manages to change the variable geometry turbo,and as you do the adjustments and if you want the specific equipment tricks or malice.
adjusting the variable geometry turbo.
hello all as the title I wanted to know who manages to change the variable geometry turbo,and as you do the adjustments and if you want the specific equipment tricks or malice.
Good Sunday ,there is no one that is giving me a straight
You can adjust it from the control rod mechanically or if it the ecu with the appropriate map in the ecu
Hello good first of may.I meant for the replacement of the correassy 'after the replacement certainly must be adjusted to the geometry.and I wanted to know how to make an adjustment.the engine control unit and the original
you base the adjustment of the old then with the tool at hand Loga pressure to reach and effective..Originally Written by lightning
or you go to experience VAG 1,9 2,0 1,5 peak etc
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
if you change the correassy and does not touch any adjustment of the valve does not need to adjust anything.
ugo ---- president A.E.P.
hello, even the one with the allen and the lock nut?
X five turbo , can you explain to me better? How do you adjustment the base ,is up.
put pressure target and a measured and see if it has,of course, mass air flow sensor egr and valve adjustment should be ok
Hello ,I'm sorry, can you explain to me better not to, or understood. Thanks
Write permission
Quote
