MARELLI MJET impariamola!

[puntospeed1.3]

I take the opportunity to ask a question of something that happened to me a few days ago.
on An ecu MJD6JFHW01ANum SW: 1064P148 Dis FIAT: 55186609 locked to the carelessness of mine, the file cannot be found
we put a backup panda MJD6JFHW02A Num SW:1098S454 Dis FIAT: 51872438 among other things, the only one that started among many, inexplicably.

The car is perfect remapped and everything is fine, But at 3000 rpm, clutch position and standing is type launch control; or commonly, as do the new gpevo etc..
do you know if that file panda is really so?? also on the panda? in the map I have not touched nnt of strange.
thanks.

[Danny]

How have you locked the 1064p148?
Anyway, Henry, the rail if it is a 6f3 75 hp to 1400 bar, and limited to 1460 bar, and other values. Here's why you salt the lens. If s****them 1500 bar measured, easily, you will turn off instantly.

[puntospeed1.3]

How have you locked the 1064p148?
Anyway, Henry, the rail if it is a 6f3 75 hp to 1400 bar, and limited to 1460 bar, and other values. Here's why you salt the lens. If s****them 1500 bar measured, easily, you will turn off instantly.

cio put it inside a p348.

[puntospeed1.3]

I take the opportunity to ask a question of something that happened to me a few days ago.
on An ecu MJD6JFHW01ANum SW: 1064P148 Dis FIAT: 55186609 locked to the carelessness of mine, the file cannot be found
we put a backup panda MJD6JFHW02A Num SW:1098S454 Dis FIAT: 51872438 among other things, the only one that started among many, inexplicably.

The car is perfect remapped and everything is fine, But at 3000 rpm, clutch position and standing is type launch control; or commonly, as do the new gpevo etc..
do you know if that file panda is really so?? also on the panda? in the map I have not touched nnt of strange.
thanks.

I don't understand xke me down to 3000 rpm with the car only stops with the clutch pressed in!!!, and then leave as soon as you move the wheels.
yet I made no changes regarding the launch control.
if you want to place the ori. bho.

[enrico pontoni]

you, but auto we talk about..? we were discussing 6jf as well as the file posted backroop, clarifies everything.

already written above: grande punto 1.3 75 hp with mjd6f3hw04p

[enrico pontoni]

I don't understand xke me down to 3000 rpm with the car only stops with the clutch pressed in!!!, and then leave as soon as you move the wheels.
yet I made no changes regarding the launch control.
if you want to place the ori. bho.

have you tried to do a full comparison of the two golds with winols? be it that you've found how to activate the launch xD

[enrico pontoni]

How have you locked the 1064p148?
Anyway, Henry, the rail if it is a 6f3 75 hp to 1400 bar, and limited to 1460 bar, and other values. Here's why you salt the lens. If s****them 1500 bar measured, easily, you will turn off instantly.

yes, 6f3hw04p. That's why I came back all then the bit at 213 miss anything...

[zioweb]

Graaazieeeeeeeeeeeee!

[alex210392]

Hi guys I join in to the discussion, my friend and I we've found some maps in the file ori a run 69cv, from the outset the race in question mounts the pump 90hp and turbine giulietta 1.6 fixed geometry, I would like to understand how to increase the pressure recovery turbo, in the meantime I am using a resistor that tricks the map.
In the attachment there is the file ori with the egr off, mod file that is on the run and an excel spreadsheet with the addresses you found so far in the map

[enrico pontoni]

Hi guys I join in to the discussion, my friend and I we've found some maps in the file ori a run 69cv, from the outset the race in question mounts the pump 90hp and turbine giulietta 1.6 fixed geometry, I would like to understand how to increase the pressure recovery turbo, in the meantime I am using a resistor that tricks the map.
In the attachment there is the file ori with the egr off, mod file that is on the run and an excel spreadsheet with the addresses you found so far in the map

I can't download the file, but if it is as I think there are 2 limiters are set at 1500 to turn up what you need...