port BDM

[ugoboss]

Hello, I ask you an information if it is possible, a colleague has connected to the flat on the e xxx spring-on the contrary, and has tried to lleggere the ecu, with the result that he has not read anything and now putting the flat from the right do not communicate any more, and throw up in the car, the machine quietly, so I guess it skipped the port BDM , someone has some info if you can and how to possibly repair the port BDM or if there another way of making connections, the ecu is edc16c39 fiat group, thanks.

[salvatoreragonese]

Hello, I ask you an information if it is possible, a colleague has connected to the flat on the e xxx spring-on the contrary, and has tried to lleggere the ecu, with the result that he has not read anything and now putting the flat from the right do not communicate any more, and throw up in the car, the machine quietly, so I guess it skipped the port BDM , someone has some info if you can and how to possibly repair the port BDM or if there another way of making connections, the ecu is edc16c39 fiat group, thanks.

hello Ugo has tried to read another ecu maybe after he made this inversion is needed for some track on e xxx and is not visible to the eye?

[ugoboss]

hello, you have tried and it all works well, I know that jump something on the ecu, there are the type of fuses but the ones I checked in I are in place.

[salvatoreragonese]

You should check continuity of any track but to be honest I wouldn't know where to start let us know if you have any update good morning

[micheleyr6]

Hello, I ask you an information if it is possible, a colleague has connected to the flat on the e xxx spring-on the contrary, and has tried to lleggere the ecu, with the result that he has not read anything and now putting the flat from the right do not communicate any more, and throw up in the car, the machine quietly, so I guess it skipped the port BDM , someone has some info if you can and how to possibly repair the port BDM or if there another way of making connections, the ecu is edc16c39 fiat group, thanks.

it's been a long time since this post...but I will try,a curiosity,but the ecu was powered by a bdm or comb?

[ugoboss]

hello, is powered only via e xxx, no comb.

[micheleyr6]

understood...that's why..it was lucky that it jumped the ecu..
I l the food is always to comb the bosch for pararmi the ****..
but then you know if it resolved?

[ugoboss]

no not solved, but explain to me why you equal the c*lo if the establishments from the comb, and what do you do deadlifts in the power supply from the e xxx spring? I believe that if you put the e xxx spring to the reverse port bdm jumps however, even if food from the comb.

[micheleyr6]

is the e xxx I connect it only to the port of the cock...and the power the do from the comb...
so if you mess up certain that you do not skip it because the 12 volt does not come reversed to the micro..I don't know if I was clear

[sisco]

is the e xxx I connect it only to the port of the cock...and the power the do from the comb...
so if you mess up certain that you do not skip it because the 12 volt does not come reversed to the micro..I don't know if I was clear

hello micheleyr6, I would like to understand well, always put in the middle between the rooster and the port bdm adapter (the one with the red led and switch so to speak), but not the food? or the adapter is not put?