***********

[zioweb]

E-mail that we see. I the resistance of the took off and just if no I did the reset deltagliando on the alfa

[giarras]

E-mail that we see. I the resistance of the took off and just if no I did the reset deltagliando on the alfa

the resistance was removed to the old 1.2.

[giarras]

if you post a picture, maybe t? can you tell me what'? .... but if I pull out the resistance then I have to put the two resistors and the capacitors, as in the picture posted???

but don't vilify! prendini a gi? modified x what it costs, ask in the shop of the forum they will advise you.

[bernardo943]

Have you installed the drivers ??? I have it set to elm 327 1.4+ and it works fine

[bernardo943]

Have you installed the drivers ??? I have it set to elm 327 1.4+ and it works fine

elm 327 1.3 excuse

[afortunao]

I can not see the file as I'm sure you collegher? with the password ... But I can say that there are several things that you can do to make it work better ELM327.

And 'to change the resistance of the termination of the line also depends on the type of interface you need to do one or more? amendments.

In addition, it should be noted that the unit? control are connected by means of pins different ? state the interface is configured ? also able to give that to say that the judgment fails to connect.

At the time of the completion of 50 my post in this forum, I put? a list of scholarships and the pin of the communication.
Greetings

[msport (exil77grande)]

I can not see the file as I'm sure you collegher? with the password ... But I can say that there are several things that you can do to make it work better ELM327.

And 'to change the resistance of the termination of the line also depends on the type of interface you need to do one or more? amendments.

In addition, it should be noted that the unit? control are connected by means of pins different ? state the interface is configured ? also able to give that to say that the judgment fails to connect.

At the time of the completion of 50 my post in this forum, I put? a list of scholarships and the pin of the communication.
Greetings

the 50 messages are used to download,view, screen, or ask for a pass for the rest you can upload what you want.

[checcosassu]

I solved it by removing the r04 and r14

[dreamc85]

the change you can? do as well on the grips bluetooth?

[SlimPickens]

If ? need to s?. I'm on one of the two that I own, I made it and it worked. Bluetooth/USB ? only the "method" transmission of data, but the circuit in the s? ? that.