Help map mj8df

[takaok]

oh my god that give oh my

No offense absolutely! They are here to learn. Thanks for the reply and the advice.. Now about it ..I still have to work very

[ake85]

I will help you gladly, but I don't like to give everything at once, you will see that slowly you will get there...just studied every single curve with the help of the ols file that, among other things ? was also put here on the forum and you will see that it will be...my works to 1.8 of the rail without the slightest error

[takaok]

the avr? watched it 100 times and I'm still on the high seas... Following the ols file I did this that I just wrote, but does not convince me for nothing

[ake85]

on the timing of the injection is not s? what have you done...then you touched the maps torque max i.e. maps that tell you that more than one pair do not have to go so they are not limiters! eye to what you do that makes games in the clutch, and not only! then the turbo pressure is not needed to change it to low load, and I recommend not to make it work on the pi? 1.4 that the slices after for the rest some improvement in c ? state, even if c ? from work

[takaok]

on the timing of the injection is not s? what have you done...then you touched the maps torque max i.e. maps that tell you that more than one pair do not have to go so they are not limiters! eye to what you do that makes games in the clutch, and not only! then the turbo pressure is not needed to change it to low load, and I recommend not to make it work on the pi? 1.4 that the slices after for the rest some improvement in c ? state, even if c ? from work

Thanks for the tips ake, after your words I have seen and I have made another and finally ? released something good
The machine ? another thing.

[ake85]

check what you have done on the maps of the rail there are values that have not changed, and then if you want that walking is the machine you have to raise two bits that limit the rail to find them as a decimal value 900 a first map rail and one near to the maps torque, good idea! and there are many other maps that you have changed, there is nothing! the last thing the map torque max you have put a value of 16000 and multiplied by the value of the conversion from 375 Nm by doing so after 1000 miles the clutch greets you

[takaok]

Hi guys. I was trying to modify a mappam for a punto evo 1.3 75hp with mj8df.
I touched on unnecessary things?
If I do any damage?
Sorry and thanks in advance.

Gold and mod.rar

Hi guys, after a long time I am back, I have not attended because my beautiful cockerel has stopped working shortly after the first experiments, due to the power supply not stabilized (fortunately, not in flash) and I decided to let it go. Now I bought another I find myself between the hands of a stabilized power supply adjustable lab Would it be possible to get my files to start working on it? For the long inactivity I do not have the required privileges, perhaps some pious soul could turn? Thank you very much, see you soon.