Hello to all and I hope very much (but much) you can help me in this situation.
are the second remapping and I stuck the unit
Lancia Libra 1.9 jtd 81 Kw 110 cv 2001.
I did the reading without any problems few days ago with Kess in the serial.
I posted the file that is read in the data bank .the gold of this portal.
following recommendations to close the egr I be amended as in the annex (egr off)
today I went to write on the ECU, I chose to write TOTAL (I believe he was wrong about them)
there made about 3 minutes and says: turn off picture - write successfully completed -
then with the ignition switched off, the last ok, the software has made the debuffering (or something similar ).
I turn on the framework and remains light yellow key (code) is on, temperature light is red and lancettra about 130 degrees and the car is not starting.
I tried writing to the old file bed, but Kess is giving me error alarm.
I have tried reading the file loaded and nothing to do always error alarm.
I tried to use the function recovery (despite not having the slightest idea how it functions) but even with that one (tried two or three times without turning off the framework) I don't remember the error but crashed.
I tried to be able to make the diagnosis, but now not even the program of the diagnosis that the use is not located in the control unit.
Quote
