Page 3 of 3 PrimaBefore 123
Results 21 to 30 of 30

View Hybrid

  1. #1
    THE AVERAGE USER L'avatar di Gianpy80
    Date Of Registration
    Nov 2012
    Messages
    214
    The backup of the e2p that I have is not good because is 4 kb. I have the full backup in which there is the e2p good and the flash is corrupt, you should know how to pull out from there the file 8 kb of e2p, because having read it in the wrong family now with the tool of the bdm are not able to extrapolate the correct file. At least this is what I think I understood it myself.

  2. #2
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    family kia/hiunday?? you're scerzando?? Ford PSA Citroen
    Estrus compressed files BDM verify that everything is ok also in my rebuilt maybe I messed up something now
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  3. #3
    THE AVERAGE USER L'avatar di Gianpy80
    Date Of Registration
    Nov 2012
    Messages
    214

  4. #4
    THE AVERAGE USER L'avatar di Gianpy80
    Date Of Registration
    Nov 2012
    Messages
    214
    I said kya hiunday because I recognize it so when I put the right file. I did so, I imported the file, leaving its e2p (now from the backup I get the right 8kb), I rewrote everything and everything was in good order. I am attaching the flash file and e2p, which I read now. However, the protocol I think it is right because when I start I identifies the family in the bosch edc16+ c34 PSA - edc16c39 Kia/Hyundai

  5. #5
    THE AVERAGE USER L'avatar di Gianpy80
    Date Of Registration
    Nov 2012
    Messages
    214
    in practice, ors as now to be safe place, I would use a file to bdm flash with hw 0281011612 and sw 1037375124

  6. #6
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    I don't know how, but it seems to me that you saved..

    Obviously selecting the family of ecu with eprom from 4Kb were going to read, and write just that part and has not affected the remaining 4Kb that he could not see..

    Eprom Seems to be OK
    The Flasks Equally

    Chiudila so and put in the bike is the machine..
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  7. #7
    THE AVERAGE USER L'avatar di Gianpy80
    Date Of Registration
    Nov 2012
    Messages
    214
    If you ask me to do it again I know that I can't seem to 😂 and the file of flash is right for bdm? Because it seems identical to the one serial. I, instead, compared it with another file of the bdm port of the ecu, the hw is the same but sw different and are completely different, is it possible?

  8. #8
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    Citazione Originally Written by Gianpy80 Visualizza Messaggio
    If you ask me to do it again I know that I can't do it ������ then the file of the flash is just right for bdm? Because it seems identical to the one serial. I, instead, compared it with another file of the bdm port of the ecu, the hw is the same but sw different and are completely different, is it possible?
    the file you mentioned:
    flash new & e2p new are ok..
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  9. #9
    THE AVERAGE USER L'avatar di Gianpy80
    Date Of Registration
    Nov 2012
    Messages
    214
    Ok for him to send it so at the time, and as soon as the test they update it. Thanks a lot for the help

  10. #10
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    The point of the situation?
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

Page 3 of 3 PrimaBefore 123

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •