Giulietta 2.0 170

[bmw320cd]

Great, and since we both noticed that the increase of temp on the DPF something changes, I throw an eye on:

"$1D5934";"EGT limiter";"8x8"
"$1D5E24";"Temp limiter";"8x8"

egt limiter in my file I have 2 , divided according to the temperatures of the fap
1 goes from 100°c to 400°c and does not restrict anything (value pedal 8192=100%)
2 goes from 650°C to 1000°C, and limits the pedal over 3500 rpm

[GPoint]

egt limiter in my file I have 2 , divided according to the temperatures of the fap
1 goes from 100°c to 400°c and does not restrict anything (value pedal 8192=100%)
2 goes from 650°C to 1000°C, and limits the pedal over 3500 rpm

I think I have found them I also, just for comparison, the values of the axis of the temperatures are in the clear with no conversion factor?
On the file you posted on page 4, that of the Giulietta TCT (I guess your) the address in question is 1C7418.
Reasoning about the values, only between 900 and 950 degrees allows the 100%. Before and after reduces the find the 20% of the request. It is also, for you as a reasoning?

[munro]

Good info..
To-day I should make myself a Giulietta 170cv maybe I'll test it a little..

[bmw320cd]

You in theory should be so...
As usual, 9 downloads and no comments.. Perhaps it was better not to share the map list files and saw that no one cooperates

[Errecinque]

You in theory should be so...
As usual, 9 downloads and no comments.. Perhaps it was better not to share the map list files and saw that no one cooperates

Sad statement .....not everyone can sit around all day studying maps....when one can put....*****s sincerely in the addresses posted I do not see anything that would restrict the iq in the higher gears.....we are at the address of the sixteen 1F74CC a series of limiters 25x1 with the axis, the iq (I am sure by damos chroma) . In the €5 there are many more for regeneration may act in this way....you should try it. However, in my opinion, you should try some limiter that has the axis, the speed of the wheels

[Errecinque]

IMG_20161107_191938.jpgIMG_20161107_191705.jpg


Rather, I would try these that I have already noticed yesterday in the damos croma I attach an img

[Errecinque]

And then??? Have you found something about the address that I told? What do you think??

[GPoint]

And then??? Have you found something about the address that I told? What do you think??

But the addresses you posted are referring to the map of the fiat 16? In the screen I read 1x1, then it is a single bit?

[Errecinque]

But the addresses you posted are referring to the map of the fiat 16? In the screen I read 1x1, then it is a single bit?

As said, the address of the range of lim 25x1 refer to the file sixteen of the map list. While the screen are the damos croma, just search the same area on the vs file. Those are related to the ratio Nm/Km / h and there is only if I'm not mistaken, 4th and 5th gear. If 6th is not limiting you, then, are those

[bmw320cd]

As said, the address of the range of lim 25x1 refer to the file sixteen of the map list. While the screen are the damos croma, just search the same area on the vs file. Those are related to the ratio Nm/Km / h and there is only if I'm not mistaken, 4th and 5th gear. If 6th is not limiting you, then, are those

limited to climb rpm's and not so much related to the speed... limit in the 4th-5th-6th gear , so I don't think they are those indicated by the damos
I apologize but I don't have much time , between the university and other commitments...