exclusion egr on the opel corsa 1.3 69cv

[Makx]

Hello everyone, should I delete the indicator, mil remains on, the opel corsa 1.3 69cv engine Z13DT after closing with flange the passage egr.

I have read and saved the file from the ecu but I have the distinct impression that the instrument or the program not have read it correctly.
I'm attaching the file and ask you if it can really be the mapping that you're running the car.
I have this doubt because watching it in 2D (16-bit motorola), the very long first part with a flat line to a decimal value of 6535 from the beginning until the address 060006, I don't see it in any of the files ori or mod of opel with which I have compared it to the map.

if according to you the map is correct, I ask you to give me the straight on the value or values to edit to exclude the egr, and/or have the lamp MIL lights on the framework.

[CLAUDIO.]

you have made a diagnosis ,that gives you the error ? the electrical part of the egr valve works or is defective ?

[Makx]

the diagnosis gives me a error related to exhaust gas recirculation.
the flange on this car I put it almost a year ago and it seems to me that from the tests made the working of the electric part.
it was locked to x dirty.
what do you think of the map? is trusted?
(I put there only 5 minutes to do the reading)

[Makx]

the diagnosis gives me a error related to exhaust gas recirculation.
the flange on this car I put it almost a year ago and it seems to me that from the tests made the working of the electric part.
it was locked to x dirty.
what do you think of the map? is trusted?
(I put there only 5 minutes to do the reading)

[riox80]

I can not open this file....what tool did you read it?

[lui93]

nada even I can't open the file

[cinqueturbo]

Hello, next time, take a moment to write which programmer you used

The file has the right Size for reading in the serial Partial 448KB and is 100% OK

EGR to address 061EEE to take 47506,0000

[Makx]

I read it with Kess, I try to ripostarlo.
instead of zipparlo the ones with the extension .rar so that it is a valid extension to upload, but the file is not compressed.
delete the extension .rar after downloading it
the file as I have it saved on my pc has no extension.
with ecm I open it without problems also without the extension).

[cinqueturbo]

I read it with Kess, I try to ripostarlo.
instead of zipparlo the ones with the extension .rar so that it is a valid extension to upload, but the file is not compressed.
delete the extension .rar after downloading it
the file as I have it saved on my pc has no extension.
with ecm I open it without problems also without the extension).

I do not see where is the problem???

except for the fact that you have not uploaded the file in the database, the File Ori and appointed that only you can find in a few weeks??

What would a Copy of cico_opel_z13dt????

Kess Serial OPEL CORSA 1,3 CDTI 16V 70CV MJD6 1413X586 01245JO01D Exchange? ORI? MOD? driver C13_79D6 here's how naming a file

[Makx]

Thanks 1000 Cinqueturbo, I had not read your post and I was responding to him, and riox, who said that not being able to open the file.

I changed as you told me you " EGR to address 061EEE to take 47506,0000 " .
I did it using the display motorola 16-bit, the one that I said at the first split I've done well to use that?

now place the file .the mod with the only change of the value for egr off compared to what I have read from the ecu.

I apologize for the inexperience and I will try to name the files in the correct way.
z13dt is the engine code, the driver I used (I have not been able to choose between the 4 that the ecm proposed to me).

I ask, in addition to confirming that the file has been read correctly.

I add a file I found from a cd-rom database. is what put me in confusion seeing similar Info to the one I read, but completely different in the first part of the map. The one I read has a very long first part with a flat line to a decimal value of 6535 from the beginning until the address 060006