learn how to recognize the maps

[tac89]

hi everyone, I wanted to get some advice on the recognition of maps to do a bit of clarity
injection: and that in which we have the limiter in high and the max that contains the cut off
pedal :and that's where in 3d we have nice uphill straight
rail?
turbo ?
limiters turbo and limit.rail
I know that many do not sbilanceranno on this topic but I will try it equally

[frenk85]

hi everyone, I wanted to get some advice on the recognition of maps to do a bit of clarity
injection: and that in which we have the limiter in high and the max that contains the cut off
pedal :and that's where in 3d we have nice uphill straight
rail?
turbo ?
limiters turbo and limit.rail
I know that many do not sbilanceranno on this topic but I will try it equally

Will that breast inexperienced,but I don't this figured out a tube of what to ask and want to know.........

[tac89]

Recognize the maps from the 2d curves

[tranky]

The maps hardly any of the people at a glance, even if you are an expert, both for the wide range of ecu for the obvious diversity of the same.
The only logical way to see what the reference is:
See the bp and see what is the value of the curves
Use the driver/damos and see it in 2d, so the beginning to focus on their form but, as mentioned above, vary from ecu to ecu
For the rest a lot of work and a few jerking off!

[tac89]

thanks tranky!!!!!
tomorrow we'll place the map of my Yaris edc15c
I can't find the map pedal
then the ecm I found 4 maps injection and evc 6....bha!!

so if you can give a okkiata!!

[Errecinque]

thanks tranky!!!!!
tomorrow we'll place the map of my Yaris edc15c
I can't find the map pedal
then the ecm I found 4 maps injection and evc 6....bha!!

Leave the driver in the ecm.....those call all injection.....of the ecu are of the damos in the network from which you can take a cue to recognize the real maps

[tranky]

Do not have faith in what the ECM identifies that it is very approximate and misleading on many maps.. Especially on edc15

[msport (exil77grande)]

hi everyone, I wanted to get some advice on the recognition of maps to do a bit of clarity
injection: and that in which we have the limiter in high and the max that contains the cut off
pedal :and that's where in 3d we have nice uphill straight
rail?
turbo ?
limiters turbo and limit.rail
I know that many do not sbilanceranno on this topic but I will try it equally

hello,based on the questions you made, I will say that if placed in the original file by specifying the brand,model,displacement,horsepower, and type of the ecu and then write completely addresses what you think you know, or would like to know maybe and I say maybe someone could give some straight, but for writing you if we talk about football and the same thing.

[tac89]

I'm trying to upload the file on the site but I get error...
I have a question...
on the evc-loading the damons I detects the important parts, but it's not giving me the names of the addresses and the normal?

we are talking about a yaris 1.4 d4d 75 hp 2006 with ecu edc15c
sorry if cilecco but they are at the beginning!

I called all from bosch 1 bosch 4 16"

[cinqueturbo]

Then..
1° to upload a file you must use the advanced mode
2° compress it with winrar or zip
3° without the Damos "descriptor" winols offers you the maps well-known and perfectly normal..
4° this is not a chat then avoid write and send messages...
a simple post turns into a novel long 300 pages and becomes tedious to follow him in addition to enter in the viewfinder of the Admin for spam...