What to buy??useful tips

[EcuEngine]

I understand perfect...another curiosity why do you say to make some via the bdm and the other by a plug-in odb??the two interventions do not serve to do the same thing???
for the purchase of interface someone can give me advice?I'm making treasure of the theory,but I see post a lot dated,I don't know if now there are some new software for me, right now I have win****+domus is still valid?thanks 1000

Are the same for all the clones of that model, they can change the brands of the internal components, but the substance is that. You have to be lucky not to run in devices that are defective from the beginning (both within the uk and from elsewhere). Currency you.

[carlo abarth]

x me the uffciciali make you sweat cold ..immaggina the cl*ni!!!

[msport (exil77grande)]

I sincerely after about 15 years of experience in chiptuning I can only tell you that a little' all have started with tools is not official, but it is also true that once there were very few management engine of type edc15 that if you stopped taking the tour desolder the eprom while today there is talk of bmw edc16 and edc17 that if you block not you the cables with less than 1500€ so guys be careful what you do because it looks like a game but in reality it is not,I rather if I had to start today I would do it with an official tool, possibly slave, and then slowly grows and become a master with a course etc

[bongio91]

My first decision was to buy something official as you say,then affiancandomi to your site I saw that to "start"used sti clones so I wanted to start so...,with the official tools, for example, you have to be always good to recognize the maps to understand where you how to act,or the software you the appointment, and divides it according to the use.i.e. if they cost 10 times of the clone, there will be a reason...it will only get the reliability??I'm starting to understand something,but it's a real mess..thank you always..I think I will take a v54 then let's see what I combine 😂😂

[msport (exil77grande)]

My first decision was to buy something official as you say,then affiancandomi to your site I saw that to "start"used sti clones so I wanted to start so...,with the official tools, for example, you have to be always good to recognize the maps to understand where you how to act,or the software you the appointment, and divides it according to the use.i.e. if they cost 10 times of the clone, there will be a reason...it will only get the reliability??I'm starting to understand something,but it's a real mess..thank you always..I think I will take a v54 then let's see what I combine ������������

Wait WAIT I'm SORRY who uses sti clones?
the professionalchiptuning is a mechanical workshop specializing in processing both mechanical and electronic from 99 and not only do we work with all the tools official alientech, and I highly recommend but even we are a dealer then you should be more careful to write certain things,the clones use them many supposed professionals or otherwise people who want to start so but then when you get to a certain ****llo, we realize that it is impossible to work with clones,for the rest, according to me, your ideas are slightly confused then you may ask, if you like to contact us via ***** leaving your telephone number and we will be happy to explain to you well how it works at least before you throw money you know exactly what it is and how to go to the meeting.

[bongio91]

I understood and it was certainly an experienced user,obviously a beginner I wanted to start from something that cost a little less...I have already informed to the alientech for the courses,only that being sicilian I'll have to organize them to follow them,my question was whether to begin, I could buy a tool base,since the first month or so I'll have to practice (now I have seen the gall the***to maybe to learn a girl the interface)and then move on to the alientech,I think it's the best in Italy??I also heard dim tronic...

[frenk85]

Wait WAIT I'm SORRY who uses sti clones?
the professionalchiptuning is a mechanical workshop specializing in processing both mechanical and electronic from 99 and not only do we work with all the tools official alientech, and I highly recommend but even we are a dealer then you should be more careful to write certain things,the clones use them many supposed professionals or otherwise people who want to start so but then when you get to a certain ****llo, we realize that it is impossible to work with clones,for the rest, according to me, your ideas are slightly confused then you may ask, if you like to contact us via ***** leaving your telephone number and we will be happy to explain to you well how it works at least before you throw money you know exactly what it is and how to go to the meeting.

A blood bath!!!!
Anyway,congratulations, I follow you also on fb

[msport (exil77grande)]

I understood and it was certainly an experienced user,obviously a beginner I wanted to start from something that cost a little less...I have already informed to the alientech for the courses,only that being sicilian I'll have to organize them to follow them,my question was whether to begin, I could buy a tool base,since the first month or so I'll have to practice (now I have seen the gall the***to maybe to learn a girl the interface)and then move on to the alientech,I think it's the best in Italy??I also heard dim tronic...

if you want experienced people you can give the right advice sensa that you throw money you I invited you to contact us foods do best for you.

[msport (exil77grande)]

A blood bath!!!!
Anyway,congratulations, I follow you also on fb

the work posted on facebook are 1/4 of what they really do.

[frenk85]

the work posted on facebook are 1/4 of what they really do.

You can only imagine how many posts..........!! Good job