120d 177 hp. edc17 problems after the map

[raziel77]

Greetings to all
You can write to me kindly how to disable the protections of this ecu?
I mapped turbo and injection but at 3000 rev /min the second, and the third goes into protection .no light on, but
No longer accelerates to the door at 1500 and goes to 'hiccup '.I have to turn off and on and resetting.
Texa from 'diagrams is not correct ', and at other times Rail pressure is not compatible with fuel flow rate" or similar .I also tried to raise but it does not change much .
Probably the turbo goes to the top of the limiter at some point but
I'm tired of opening and closing the unit and solder the cable to the boot ...at least I knew how to sproteggerla to read it in the serial I want provev on the fly

..maybe it's antituning. Having been last updated in.the summer of 2009 .so I don't know if you can .

Then I read that there are some 'bits' d control in hexadecimal from the tap to remove the checks that is evpoterla map without rompimenti c.
Thanks

[cinqueturbo]

Why not post the file? not that we're talking about the wind in this way?
also the error codes would be welcome.
I can not guarantee help on the topic of the anti-tuning an eye on the map and not harmful mica..

[raziel77]

Ah c.and. little to see , they are prob old d a ecu that has lasted ten years, But who has the most esp d me wit.the other hand, there is already past

[frenk85]

I'm sorry if you say it but then if there is little to see, it seems to me irrelevant to your post!

[raziel77]

The request is clear, if you have any of the answers..

[ugoboss]

The request is clear, if you have any of the answers..

does not seem the way to ask for help if you don't want to post your map for fear that you copy, you're peaceful, you said that he has problems, in any case on these you there are limiters such Torque Monitoring but are not easy to explain as you take them off, in any case, you can reach very good results without working on these, just calibrate well the maps, and here I close.

[raziel77]

Ah I know that you want to copy.c.and. little ,
So l.the car does not go.
I wanted to avoid d make a soft tuning for power . So I followed the guidelines I have been taught but I increased probably over-values.
But from there, we ..

I have read as well about the addresses about t.m. I will try those..

[Errecinque]

The request is clear, if you have any of the answers..

How can you think someone can give you some tips without posting the file first, ori and what hw and sw you are talking about. And without seeing the mod you did as you may understand why you should be in recovery. If you use the search I think you will also find how to unlock for obd your ecu, I think I have read something about it

[msport (exil77grande)]

I believe that when you ask for help on a file before writing you have to post ori and mod and so someone who has the time and desire can give you some advice or try to solve your problem, but as you are hardly someone to help you,said this is a problem and have been seen that a lot of tuner you are faced with this problem and without a fix, and if you don't unlock the Tqcm not go beyond the 15cv.

[raziel77]

Hello m sport ,

I have not asked for an opinion on a map castrated by the tqcm it how to do to make it go a Bit more under the limitation, but to the more experienced d me a tip on how to remove them .so I don't see how the file ori and mod d softuning between.other things not touched on in its entirety, and as there are many , may serve in this regard.

Reading around it seems almost unworkable, so at the moment the ecu I leave it as it is for the best of times ,and goodnight