Page 3 of 3 PrimaBefore 123
Results from 21 to 25 of 25
  1. #21
    BEGINNER
    Date Of Registration
    Dec 2012
    Messages
    2
    You may have to kindly the total file for the eprom 29f200 ecu ems3132? and the instructions for the jumper to operate the air conditioning and various?
    Thanks in advance

  2. #22
    BEGINNER
    Date Of Registration
    Aug 2012
    Messages
    14

    Ecubsiemens 3132

    uv hello angel can you tell me how is the procedure I the same problem thanks

  3. #23
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    Messages
    249
    Citazione Originally Written by kappaca Visualizza Messaggio
    uv hello angel can you tell me how is the procedure I the same problem thanks
    If you read a few posts back you will find how I fixed it anyway:
    I scodificato the 29f200 as you do with the sirius 32n then I mounted an emulator can ( the car in question had the can ) directly on the chip of the can ( which now I can't remember the acronym but with a little research, you'll find him safe ) for the starter I had to report a negative, it seems to me, to the relay of the starter motor otherwise it wasn't running...
    All here

  4. #24
    BEGINNER
    Date Of Registration
    Aug 2012
    Messages
    14
    Citazione Originally Written by angel Visualizza Messaggio
    If you read a few posts back you will find how I fixed it anyway:
    I scodificato the 29f200 as you do with the sirius 32n then I mounted an emulator can ( the car in question had the can ) directly on the chip of the can ( which now I can't remember the acronym but with a little research, you'll find him safe ) for the starter I had to report a negative, it seems to me, to the relay of the starter motor otherwise it wasn't running...
    All here
    hello then I have to give a negative to the relay starter motor because I did scodifica put the emulator I pulled the uch, but in doing so not spinning the starter motor I have to try to give negative to the relay starter motor

  5. #25
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    Messages
    249
    I have not detached uch anyway you can do the test by turning the ignition and bridge the relay to the starter to see if...

Page 3 of 3 PrimaBefore 123

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •