Page 3 of 3 PrimaBefore 123
Results 21 to 30 of 30
  1. #21
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    I don't know....there are tools that can do the crash in serial, such as the one I quoted, but to the sensor weight I don't know... however, the emulator must be installed below the connection of the seat...

  2. #22
    THE AVERAGE USER (FO)
    Date Of Registration
    Jan 2013
    Messages
    483
    I also had the ache to do with a problem on air bag bmw 5.23 inherent to the sensor employment passenger seat and I solved it with resistance bought online, complete of connector to insert in place of the wiring that goes to the seat cushion, even the type sold in both the resistance that was either the seat which is occupied, that the one who did it either ******looking I also found the emulator to, as you put jumper f? either the seat is occupied or not, while I was looking for I seem to have seen also for fiat, look on ebay, I enclose a pdf of the emulator for bmw, but I think that will be? so much for fiat
    File Allegati File Attachments

  3. #23
    THE AVERAGE USER L'avatar di nasone147
    Date Of Registration
    May 2013
    The resort
    avellino
    Et
    40
    Messages
    141
    I strongly recommend the solution mentioned already? some of the links above,the emulator that is on the network,unfortunately I can not go into specific,so I had to test it and it works perfectly.
    good job to all!

  4. #24
    THE AVERAGE USER (FO)
    Date Of Registration
    Mar 2013
    Messages
    133
    Exactly as it says in glittering chiffon party dress.fitted the emulator ? the instrument pi? spot on for this type of problem

  5. #25
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    Messages
    203
    Citazione Originally Written by glittering chiffon party dress.fitted Visualizza Messaggio
    Always speak of the presence sensor passenger side? if not, in many cases, if the problem ? regarding, side airbags,front seatbelt pretensioners etc ,if you want to permanently delete all the errors you have to clean the connectors with spray dedicated hello.
    curiosities?: but ? recommended to disconnect the battery before working on the connectors, or can you? do everything with just the ignition turned off?
    I would not want to do a crash test from a standing!!!!

  6. #26
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    Citazione Originally Written by giary74 Visualizza Messaggio
    curiosities?: but ? recommended to disconnect the battery before working on the connectors, or can you? do everything with just the ignition turned off?
    I would not want to do a crash test from a standing!!!!
    you feel me pull the battery any operation woi do
    while the others are still talking about us, we have already solved the problem
    GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ

  7. #27
    THE AVERAGE USER L'avatar di nasone147
    Date Of Registration
    May 2013
    The resort
    avellino
    Et
    40
    Messages
    141
    I Legendaryslave!!! ;-)

  8. #28
    BEGINNER
    Date Of Registration
    Nov 2013
    The resort
    mussomeli
    Messages
    79
    go with the emulator I mounted and goes to great and then you spend only the money and you're quiet,I have changed the various sensors in the seats, and I realized that on the stylus always have problems on a stylus and was changed for 3 times

  9. #29
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    guys the emulator that you buy in a network what is a resistance on the wire that tells the ecu that the place is occupied, then the emulator costs an average of 25-30 € a resistance much less.
    ugo ---- president A.E.P.

  10. #30
    BEGINNER
    Date Of Registration
    Sep 2016
    Messages
    2
    Good evening guys, in reference to the failure of airbag, can you tell me what the cost might have to do to exclude the drivers from the controller with a few interface and software dedicated to someone? The car, as presentation is a fiat stilo 1.6 16V the year 2001. thanks

Page 3 of 3 PrimaBefore 123

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •