Flash pro v

[Fabiuz]

What you want it to be hugh, but the master china obvious......
I do not want to take sides of anyone, I'm an operator/user of the industry that works with Alientech, FG etc....
And I can tell you that in everything the fool is DImxxxx and we know why----
And managed to sell the product before the clone spacciandoli x a their product only by changing the icono of the sw.
And then to spoil a good product as it could be in the source MAG of the Macig.
In fact, they do NOT assemble a blessed beep, appicciano only a sticker on a product is not their....
And you install the firewall to not to go online, odd x a the official no...
Are not even able to take trade agreements, serious, saw that they bought from the manufacturer of the SLAVE!!!!!
Claiming to MASTER, and now to apologise file free until CHRISTMAS!!!!!
And asked for first 2500€ rate€ 500 monthly x a clone.
And then 5000€ for a SLAVE!!!!!!
They will also be friendly and courteous in you to files 30€ cacate....
BUT to me with the subscription they have made to wait for 1 and I say 1 month, not 1 day, for a cabbage EGR OFF and mappetta bland its a POLO 1400i engine of the GOLF 2002.....
BUT we are kidding......
How you defend the work in their cal center and perhaps we have even spoken.
And you are so awake that I have installed the vs FLASH PRO aka their computers 2.10 on my kess chinese fw 4.036.....
Great!!!!!
Knowing what it was I asked I want to make the iveco daily EDC16C34...... And you the PRO V is out of production.... it was better to say, if you have a clone not you can add them.... If it was a true alientech jonatan, I would have asked 400€ x protocol daily edc16 and I worked in peace.
Obviously, to you + convenient Magic to make you the WARRANTY, because who knows how many kess china you have thrown in the toilet.
With fw 3.099 and SD mod UNlimieted token, not bad x 2500€
And poured in their complaints Known, and I believe.....
Mr NOBODY!!!!
Thoughtful people.... there is the atrezzo best of all, only those in the know place it behind the better.... other things that suggest....

[Fabiuz]

If I would be somebody that you criticized would say.....
YOU, however, we see that you are a chemical engineer, is the fava, as scorreggi from the mouth.... and that works for the devil, who defend by the sword.... as the trident maserati...:-)

[tecnoecu]

idea let's give the protocol number of the patent that they have delivered from the lords of the dimtronic to clarify everything

[Ferraglia]

I know that I have touched a raw nerve as it is heated, the discussion (and yet I did not do names...) however, I stand behind my work and the money that I spent to buy my tool, nothing else, no other . On a forum you can write your own experiences in a democratic and civil, but perhaps not all know what it means.... Then if someone wants more in-depth explanations , seen flying words in a few orthodox churches, and in this regard, I was expecting an intervention of the directors, are at your disposal, but outside of the forum.... With this I close, and in view of the mediocrity of the discussion I will not give more below....... I forgot ,however , am a repair technician for about 20 years....good job to all

[tecnoecu]

sorry but, you say you really or are you joking? but that you believe ke here we all crazy or what? you do well to defend your work, but I agree with say stupid things before you said I know, alientech, and that they are just as flexible........bheee, I can say with certainty ke you said a bullshit and also the great " I work for more than 5 years with them I've spent almost 20000 euros and I assure you ke mr jonatan has given me flexibility and I can assure you ke their intent, but I sell you the map to the 30 euro, but I formed you, and get the most from their tool.

[ugoboss]

I know that I have touched a raw nerve as it is heated, the discussion (and yet I did not do names...) however, I stand behind my work and the money that I spent to buy my tool, nothing else, no other . On a forum you can write your own experiences in a democratic and civil, but perhaps not all know what it means.... Then if someone wants more in-depth explanations , seen flying words in a few orthodox churches, and in this regard, I was expecting an intervention of the directors, are at your disposal, but outside of the forum.... With this I close, and in view of the mediocrity of the discussion I will not give more below....... I forgot ,however , am a repair technician for about 20 years....good job to all

on the forum you can write your own experiences, right, but for education it is also fair to present themselves before writing, then I don't see why would you want to clarify outside of the forum, you've been writing here over and above to education should continue, I had only asked if your sw is a master or slave, but you pretend not to understand, in any case, if you don't want more talking you do is to confirm what I think of you, finally if you are a car repairer for 20 years, I do not see what centers with this story, and I did it for many more years, and then? and with this I leave everything in the hands of the administrators of the forum, will be able to decide on the best.

[blackwolf76]

That I know of lately, the flash pro-V have been recalled, as though sold as the master worked only by slaves, and remote it was not possible to upgrade...

Ps: I would like to understand what does the experience from autoripatore with the equipment that one buys...

Maybe those who run the chinese clones from 4 money probably has the most ability of those who buy tools official file by the thirty euros which, as I have been able to verify are not always what you can define a ****work...

[tecnoecu]

you have said well

[carlo abarth]

I confirm in quandto my friend does not have add!!!

[Gianpy80]

Dear Gianpy80 who gave you this information? And' sure what that says? He really called the Magicmotorsport? With those who have spoken...?Are you aware that spreading false information can be a starting point for a nice a complaint...? As work in this sector? I ask you to be well informed before you write...or call the manufacturer if you know it...she has done quite a bit of confusion...please do not spread false news because I assure you that she has never called the magicmotorsport, and then no one has been able to provide the information that you described for this should rectify all the information entered since they are false, and the the board of inquire and study better before to write because of what it says shows its inexperience in the field, users much more experienced of you have already responded, but I wanted to clarify and ensure that the users of the forum that what you write is all fake. In case you want to explanations call the magicmotorsport, truly, however, will be given the information that it asks and the next time the council to be less cocky and more careful in what she says.

excuse me, and she who would be§? the paladin of justice? only one post and already you make such insinuations? the council to take a ride elsewhere, and not to create disorder, to whom this work is an attempt to do it, the more seriament possible.

However, the update for the others:
For about a month, I was activated the portal to the encoding/decoding of files and it works perfectly. The interface has been updated with the addition of over 900 protocols and to date I have read/written dozens of cars without any problem.. The maps now I can make them I decodificandole from me in 20 seconds or I can send them that with 30 euro and about half an hour of the recall and are perfect then for me, feedback is more than positive, from the OWNER... all those who speak for heard are only a CHAT FORUM of people that believe they are able to work seriously and professionally with interfaces in chinese from 20 euro and here I stop..