ford focus cmax 2008 90hp

[cinqueturbo]

But do you realize the address posted? do not give solutions to brettio so much to play.

You will be wrong to copy the addresses..
important and that I discovered it

And the play I do not know to what you refer then personal opinions barn for you.
Help as much as I can and I don't do guinea pig for fun.

I'll tell you a secret and give my advice
not all but 98% of the EDC16 have the controls of the EGR immediately after the map Phase Injection
and here is the council foul manually when you don't have a software to height..

[perrysound70]

Ok thanks to all....but who has seen the map, I can tell if it steps wrong as I've seen with ecm?the map injection I say...

[perrysound70]

For the driver, just look for the manually "F701_199" that should be the driver of the ecu, at least you have the maps in check, for the file ori should I must have 80msg minimum for download..

But that is the type of driver you want to try with the Ecm ? I have tried a ecu focus the eoc's equal to my and also the type that I get from kess "77" and open it and see that it is completely wrong about everything....all the maps are unpacked so much?

[cinqueturbo]

Ok thanks to all....but who has seen the map, I can tell if it steps wrong as I've seen with ecm?the map injection I say...

But that is the type of driver you want to try with the Ecm ? I have tried a ecu focus the eoc's equal to my and also the type that I get from kess "77" and open it and see that it is completely wrong about everything....all the maps are unpacked so much?

I don't understand what do you want to see is not having the file GOLDS??

also loading the driver F701_199 see the maps etc, but not the changes...

[Errecinque]

But that is the type of driver you want to try with the Ecm ? I have tried a ecu focus the eoc's equal to my and also the type that I get from kess "77" and open it and see that it is completely wrong about everything....all the maps are unpacked so much?

Given that I checked only addresses the egr, without the file ori to compare with the mod how do you tell which is busted? I have to find the original file and then you can compare the increases or decreases made

[tranky]

You will be wrong to copy the addresses..
important and that I discovered it



I'll tell you a secret and give my advice
not all but 98% of the EDC16 have the controls of the EGR immediately after the map Phase Injection
and here is the council foul manually when you don't have a software to height..

The council of gold.
Thanks friend

[perrysound70]

For the driver, just look for the manually "F701_199" that should be the driver of the ecu, at least you have the maps in check, for the file ori should I must have 80msg minimum for download..

I checked in with the f107.199 and with ecm is quite cortetta but type on the limit pressure, the rpm doesn't add on fuel injection split the scale load on the engine does not come back.....

[cinqueturbo]

I checked in with the f107.199 and with ecm is quite cortetta but type on the limit pressure, the rpm doesn't add on fuel injection split the scale load on the engine does not come back.....

Maybe you have the wrong key in the driver F701-199, and the driver and I guarantee you that and he saw that I have the file ori and is loaded in the machine.. I have No way to open the file at this time but I don't remember anything abnormal in this driver.. Even if it was in any case can also work without the 2D

[perrysound70]

2d are not ready.....or I do some testing....also, because I have seen that the surge pressure ( I think turbo) that have not been touched and are much lower than of the map turbo....possible that the "preparer "has made a mess?

[perrysound70]

Then there are other ways to remedy the file GOLDS ?