Hi all I'm trying to map a lancia y 70 hp of a friend of mine with the following wording NEVERTHELESS 6JF.Y/HW0101C/1065-Y154
For now, reading various posts in the forum I created the first map that I'm loading on the car to start it to see how it behaves...you can give it a look?surely you have to work on given that I have only modified what is in the driver ecm. I attach ori and mody-eugenio_Mic.rar
065422
065450
0654A6
0654DE
you have a whole series of limiters
065ACC you left too soon where the laws 4500 are 700 maximum 12800
0675BE forgive ori needless to touch it
0680F6 other lim.
068A44 injection split I don't think you read to the contrary, since the increase of the pressure drop times..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Thanks cinqueturbo tomorrow I fix everything and place the files,this is the first marelli which I try to map and I have to say that I understand very little...all a else respects to the bosch.to help me out driver I need to force things to winols and the damos? At the moment I don't have, or I have other roads?
Enough addresses that you have available..Originally Written by giuseppe89
I do not believe that becomes a murcielago, it becomes more lively and snappy that for what the car and more than enough..
very important, and the air mass meter and if fumicchia check the inlet manifold, if they are all ok from the pressure to the turbo by moving the nut on..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Hello cinqueturbo, satisfy a curiosity.....I'm the max limit to 12800 of the torque required to what is due? Why?
Because in addition to many other limits which they ought not to lose his head ..
In addition to send the ball into the ecu do not get anything concrete...
Take a look at a file, 105hp, you will understand better..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Thanks maybe I have solved the problem of the warning light that flashes and that cut on a stroke 70cv.. went over 12800. I try to lower them.
Never had cases like this, except with cars distorted extremely..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Cinqueturbo gave a look at the directions that you gave me,as far as the limiters that I have indicated I have to display 16-bit right? And are maps, from 8x1 or am I wrong? Another concern relates to the map you want to put golds or injection zoned,this is not the map rail? Sorry for the question maybe very stupid, but I am really at the beginning...and I still can't figure out how to distinguish what we have on the two axes x and y according to Bp and the rest
Here is the correct file according to the directions,I hope not to be wrong the otherY-EUGENIO_MIC-Mod-egroff+limitatori.rar
As soon as I have the car, load the file and check how it goes.thanks to all
Quote
