Reconstruction of the Alfa 159 1.9 Jtdm 120 hp

[gianlucacll]

Hi all, doing a write with MPPS I have planted the control unit and the serial did not speak more...
I disassembled and opened, and I did a reading with the rooster at the bdm.
Then I rebuilt the file with the bdm with the original that I had read with MPPS.
I downloaded bdm connected the ecu and the car started and seems to have no problems.
The question is this, can you give a look at the file to see if I did everything correctly?
If it was correct you can also put it in the database.
Thanks!

[Errecinque]

Hi all, doing a write with MPPS I have planted the control unit and the serial did not speak more...
I disassembled and opened, and I did a reading with the rooster at the bdm.
Then I rebuilt the file with the bdm with the original that I had read with MPPS.
I downloaded bdm connected the ecu and the car started and seems to have no problems.
The question is this, can you give a look at the file to see if I did everything correctly?
If it was correct you can also put it in the database.
Thanks!

If that is the game you've done everything correctly. If you open the file with ecm and you automatically recognizes the driver it means that it is ori

[gianlucacll]

If that is the game you've done everything correctly. If you open the file with ecm and you automatically recognizes the driver it means that it is ori

Thanks for the info!
I saw the message that says do not load more than one file...
If you would like to contribute with my reading as I do?

[blackwolf76]

If the car starts, and there are no problems then it means that it is ok.

That I know of allow you to upload the file... the download is not allowed if you do not reach 80 msg.

[gianlucacll]

Thanks, browsing through the site I found the section and I proceeded to upload the files, I hope they help someone even if the car in question is almost vintage!!!