Guys, help me in another post that I opened for my problem.... there are BIG NEWS.... thanks to your advice
Guys, help me in another post that I opened for my problem.... there are BIG NEWS.... thanks to your advice
hello,
I change my scenic II digital, but the radio station does not work, my scenic II ? 2004, ma ? new digital, maybe the digital ? the other version, or c'? a trick to change ...
Dashboard change of the scenic non c'? no makeup!!
You do not really understand something until you can explain it to your grandmother (Einstein)
Hi ...
..the procedure for replacing the mosfet and fuse 6A ? ok ... I have repaired about 200 pcs gi? from way back in 2004 ..never replaced the resistor and capacitors ..***** and try to sell you some company ... just redo all the welds of a group power for instance the one around the transformer ...l-max controller !!
What I have not read ( or maybe me ? escaped ) " ? that should always be rescheduled for the 93c56 " ...the classic problem of these pictures ? with the fight of the tensions in the KM to go up dramatically, as you lose the configurations ...frame, etc etc ... the fact ? that there are about 10 different versions and at least 2 with power supply voltages of the display V 5.0 and V6.01 --
if the file you unconfigure the framework does not light up and if it does you have a prob as the instantaneous power.... etc etc
I venture to answer why? I ran into the same problem. The precise sector are a complete beginner, but electronics I've come a long way.
Start by saying that, strangely enough, I've already? solved one and today still does not fit.
My procedure ? was the following: I have used enough flux and then with a hot air station (I would say professional) I made the reflow of all the components in the SMD. After that with soldering iron rod set at 245? I have taken all the welds to reofili. The second step, I replaced the micro fuse, and the driving mosfet.
The last step is very important ? was that the cleaning total and accurate flux and the residual parts of solder contained null pond using detergents for cleaning the PCB.
Prior to my intuition, I drilled holes for the ventilation of the components also I confess to you that I set out to do, which if included would have mounted a small fan to the suction holes is managed by a very simple temperature sensor that are now at a very low cost.
I really enjoyed it, believe me.
Greetings
hello Motorsport, since I can not contact you in private, could you give me the password to your guide?Originally Written by motorsport
Thanks
good evening to all, referring to what was said by our friend centrohifi about the memory that should always be rescheduled, I have seen that is used for Dashboard Renault Scenic 2 editor, a program that I can not find on the net. Is there anyone who knows where to find it or some alternative?
Write permission
Quote