Problem map Alfa Romeo Mito 1.6 jtdm2

[giuseppe89]

Tranky I'm sorry if you correct it but time is the euro 5, I have made more than one including my own (delta 1.6 mjt edc16c39 €5) the only flaw is that it paves the dtc but enough to put gold in the area related to the dtc and everything works easily...the swich off that I know he could do only about €4.then the file he processed should be correct

[Racer83]

Tranky I'm sorry if you correct it but time is the euro 5, I have made more than one including my own (delta 1.6 mjt edc16c39 €5) the only flaw is that it paves the dtc but enough to put gold in the area related to the dtc and everything works easily...the swich off that I know he could do only about €4.then the file he processed should be correct

To recap, this is the file that has generated a time should work with the change you suggested? but what is this part to replace the golds??

[giuseppe89]

Of course, without dtc working

[cinqueturbo]

I would add that it is a good practice to make replacement or resetting parameters fap with diagnosis before writing the mod file..

[Racer83]

I would add that it is a good practice to make replacement or resetting parameters fap with diagnosis before writing the mod file..

When I returned to the previous map the Mpps wrote that he corrected and cleaned 12 errors... are those??

[giuseppe89]

Racer83 not use mpps, and I don't know what "errors" he corrected in this file,but I doubt whether in the case of the parameters of the dpf,for that you need a diagnosis. With regard to the part to put back ori varies from file to file,overlaying the file ori and mod you should notice that a part is all zero. If the file ori and mod tomorrow I give him a look

[Racer83]

Multiecuscan can go well to make a self diagnosis???
However, I took a look at the flight to the comparison between ori and the file generated by time... there are several points that are clear
I have attached the file as I have requested

[tranky]

1037515044 ALFA ROMEO MITO 1.RAR
test so, I changed the bit clogging that you had to -6 and brought to the -4 as was recommended to me.
Do the procedure with multiecuscan putting the file ORI, reset the powder, reload the mod, and pray that it is ok.
Unfortunately, it is not tested and surely you have a few dtc to be put off, but it starts to do this procedure and see the outcome.
The feedback the you'll with time since reset with multiecuscan the fap regenerates after X km from the..
Let us know

[giuseppe89]

1037515044 ALFA ROMEO MITO 1.RAR
test so, I changed the bit clogging that you had to -6 and brought to the -4 as was recommended to me.
Do the procedure with multiecuscan putting the file ORI, reset the powder, reload the mod, and pray that it is ok.
Unfortunately, it is not tested and surely you have a few dtc to be put off, but it starts to do this procedure and see the outcome.
The feedback the you'll with time since reset with multiecuscan the fap regenerates after X km from the..
Let us know

tranky I had not seen that you were already intervening you,I was already replying while you have me in advance...racer, however, can not download files data the few messages I wanted to ask you if you've noticed yourself, those two bits that are not modified in your files,I really do not know to what you refer, but for now, time has not given me problems with this ecu, and I believe that I can try with that system don't you think?

[tranky]

Sorry, but I have been busy.
The question of Time is that brasa too much stuff, and on a giulietta €5 to me did not work, the clog is always reappeared as an error p2002.
I have yet to confirm this but from what I understand this ecu does not go with the bit setting but only with the bit clogging to be put at -4 after a beautiful pass with multiecuscan and reset the parameters of the dust, then you write the file you should not have more problems.
If you do not recommend the use of mpps on this €5, the better the v54 and elm327 with multiecuscan go quiet that on the alpha is perfect!
Let us know the outcome